Ultrasonic vibrations and coal permeability: Laboratory experimental investigations and numerical simulations
نویسندگان
چکیده
منابع مشابه
Further Investigations on Simultaneous Ultrasonic Coal Flotation
This study investigates the flotation performance of a representative hard coal slime sample (d80 particle size of minus 0.2 mm) obtained from the Prosper-Haniel coal preparation plant located in Bottrop, Germany. Flotation was carried out with a newly designed flotation cell refurbished from an old ultrasonic cleaning bath (2.5 L volume) equipped with a single frequency (35 kHz) and two differ...
متن کاملNumerical simulations of Beam’s Vibrations between Stops
We present numerical simulations of vibrations of an elastic beam between two stops. The beam is clamped at one end to a vibrating device; the motion of the other end is restricted by two stops. The contact is modeled by the normal compliance condition which describes nonlinear flexible stops, and approximates the Signorini condition for rigid stops. We propose a finite element method for the n...
متن کاملExperimental and Numerical Investigations on the Effect of Rectangular Openings’ Aspect Ratio on Outflow Discharge
Up to now, a few formulas have been suggested by scholars for the amount of discharge from openings, however, the effect of opening's geometry on the amount of discharge has not addressed thoroughly. In this study, to assess the effect of rectangular openings’ aspect ratio on the discharge amount, experimental and numerical investigations have been conducted on the discharge amount from rectang...
متن کاملExperimental and Numerical Investigations on Al2O3–Tricosane Based Heat Pipe Thermal Energy Storage
The enhancement of operating life cycle of electronic devices necessitates the development of efficient cooling techniques. Therefore, in the present work the effects of employment of Phase Change Material, in the adiabatic section of heat pipe for electronic cooling applications were experimentally and numerically investigated. Tricosane (100 ml) is chosen as PCM in this study, where Al2O3 nan...
متن کاملNumerical and Experimental Investigations on Springback of U-bending of DP600 Steel Alloy Sheet
The most prominent feature of sheet material forming process is an elastic recovery phenomenon during unloading which leads to springback and side wall curl. Therefore evaluation of springback and side wall curl is mandatory for production of precise products. In this paper, the effects of some parameters such as friction coefficient, sheet thickness, yield strength of sheet and blank-holder fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Mining Science and Technology
سال: 2017
ISSN: 2095-2686
DOI: 10.1016/j.ijmst.2017.01.001