Ultrasonic Transmission Tomography Sensor Design for Bubble Identification in Gas-Liquid Bubble Column Reactors
نویسندگان
چکیده
منابع مشابه
Metabolic modeling of synthesis gas fermentation in bubble column reactors
BACKGROUND A promising route to renewable liquid fuels and chemicals is the fermentation of synthesis gas (syngas) streams to synthesize desired products such as ethanol and 2,3-butanediol. While commercial development of syngas fermentation technology is underway, an unmet need is the development of integrated metabolic and transport models for industrially relevant syngas bubble column reacto...
متن کاملMixing in Bubble Column and Airlift Reactors
M ixing behavior of three geometrically equivalent 0.06 m bubble column and airlift photobioreactors was compared for use in microalgal culture. Mixing was characterized in terms of the axial dispersion coefficient, mixing time, circulation time and Bodenstein number. Measurements were reported in tap water and sea water, as used in growing microalgal biomass. Compared with the two airlift reac...
متن کاملEfficient numerical techniques for flow simulation in bubble column reactors
A dynamic Euler-Euler model for gas-liquid flows subject to mass transfer and simultaneous chemical reaction is assembled. The bubble size distribution is computed from an equation governing the evolution of average bubble mass. Highperformance finite element tools for numerical solution of the problem at hand are discussed. Computational results for the chemisorption of CO2 into NaOH shed some...
متن کاملApplication of New Inflection Point Method for Hydrodynamics Study in Slurry Bubble Column Reactors
Bubble column reactors are used in a wide variety of applications such as multiphase bioreactors, catalytic slurry reactors, and absorption processes. The superficial gas velocity-gas holdup relationship and transition point are two important parameters for characterizing the hydrodynamics of a bubble column reactor. In this study, systematic investigation of a nitrogen - water - glass bead...
متن کاملMass Transfer Studies in Shallow Bubble Column Reactors
Mass transfer studies are carried out in a bubble column with an internal diameter of 14 cm and various static liquid heights. The mass transfer coefficient is evaluated by using an oxygen sorption method. A model considering the gas holdup flushing and the sensor response is used. The interfacial mass transfer area is determined according to the measured bubble size distribution. The liquid-si...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2018
ISSN: 1424-8220
DOI: 10.3390/s18124256