Ultrasonic inspection of cast iron with a focusing probe.
نویسندگان
چکیده
منابع مشابه
Modeling of Ultrasonic Testing for Inspection of Nodular Cast Iron Insert
Nodular cast iron insert will be used as the inner component of nuclear fuel disposal canister. The outer cover of the canister is copper tube of 50 mm nominal thickness. Nodular cast iron insert is cast around several steel channels, which also strengthen the structure. The mechanical properties of the cast iron insert will be tested according EN-1563 /1/. According the specifications 100% NDT...
متن کاملCast Iron Metallurgy
Cast iron (CI) is one of the oldest materials in commercial use. It has excellent compressive strength and is commonly used for structures that require this property, as well as for water and sewer lines. This article explains CI metallurgy and why the understanding of this metallurgy is key to understanding other ferrous materials and alloys. The composition of cast iron (CI) varies significan...
متن کاملReal-Time Quantitative Ultrasonic Inspection
Most frequently applied ultrasonic inspection techniques measure the reflectivity of geometric scatterers that are caused by impurities, flaws and defects in the material. Based on the echo sounder principles, the reflector has to be insonified by directed sound pulses. This requires a large number of transducers with different incident angles and sound field patterns, which are more and more r...
متن کاملInspection of Thick Parts with Phased Array Volume Focusing
VOLUME FOCUSING IS A NEW TECHNIQUE BASED ON PHASED ARRAY UTILIZATION. Some of its advantages are to inspect faster, to be able to make multi-mode inspections at once, and to increase the depth of field of the UT beam to inspect thick parts with only one probe. This document does not demonstrate or explain concepts, but provides an experimental point of view. This document confirms advantages, b...
متن کاملUltrasonic guide wave inspection of fillet joints with bend
The paper presentsan ultrasonic guided wave methodology for inspection of a fillet joint with a bend.Owing to the complex shape of the geometry, it is not amenable for conventional techniques. The methodology developed utilizes through-transmission ultrasonic testing. Two 90Δ angle beam (surface wave) ultrasonic transducers of central frequency 2.25 MHz, acting as a transmitter and a receiver a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 1989
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.55.2637