Ultrasonic generation by pulsed UV lasers
نویسندگان
چکیده
منابع مشابه
Recrystallization of silicon by pulsed lasers
2014 Calculation of the evolution of temperature during pulsed laser annealing has been performed. The results are presented in directly useful figures for the two kinds of laser generally used (YAG, Ruby). The results are compared to various experimental measurements performed by RBS. If the crystallographic quality is quite good, TSC and DLTS measurements have shown that electrically active d...
متن کاملInline ultrasonic rheometry by pulsed Doppler.
This will be a discussion of the non-invasive determination of the viscosity of a non-Newtonian fluid in laminar pipe flow over the range of shear rates present in the pipe. The procedure used requires knowledge of the flow profile in and the pressure drop along a long straight run of pipe. The profile is determined by using a pulsed ultrasonic Doppler velocimeter. This approach is ideal for ma...
متن کاملDeep-UV Excimer Lasers
The recent trend in microelectronics towards patterning critical feature sizes of 0.25 m and below has motivated the development of microlithography at the deep ultra-violet (DUV) laser wavelengths of 248 and 1 93 nm. In recent years the performance, reliability, and cost of ownership of excimer light sources have improved. Some key technologies needed for excimer lasers in microlithography inc...
متن کامل0.9W compact UV pulsed lasers using high-power VCSEL array side- pumping
A compact UV pulsed laser pumped by high-power two-dimensional arrays of vertical-cavity surface-emitting lasers (VCSELs) was presented. A passively Q-switched 1064-nm Nd:YAG laser was side-pumped by kW-class 808-nm VCSEL pump modules and the output pulses were frequency quadrupled to 266-nm. 10-ns, 0.68-mJ UV pulsed output was obtained at 1.33k-Hz repetition rate. The average UV power is > 0.9...
متن کاملUltrasonic Power Output Measurement by Pulsed Radiation Pressure
Direct measurements of time-averaged spatially integrated output power radiated into reflectionless water loads can be made with high accuracy using techniques which exploit the radiation pressure exerted by sound on all objects in its path. With an absorptive target arranged to intercept the entirety of an ultrasound beam, total beam power can be determined as accurately as the radiation force...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of the Acoustical Society of America
سال: 1985
ISSN: 0001-4966
DOI: 10.1121/1.2022142