Ultrasonic exfoliation of carbon fiber: electroanalytical perspectives
نویسندگان
چکیده
منابع مشابه
Carbon Nanotube Paper-Based Electroanalytical Devices
Here, we report on carbon nanotube paper-based electroanalytical devices. A highly aligned-carbon nanotube (HA-CNT) array, grown using chemical vapor deposition (CVD), was processed to form bi-layered paper with an integrated cellulose-based Origami-chip as the electroanalytical device. We used an inverse-ordered fabrication method from a thick carbon nanotube (CNT) sheet to a thin CNT sheet. A...
متن کاملWire, mesh, and fiber electrodes for paper-based electroanalytical devices.
Here, we report the use of microwire and mesh working electrodes in paper analytical devices fabricated by origami paper folding (oPADs). The important new result is that Au wires and carbon fibers having diameters ranging from micrometers to tens of micrometers can be incorporated into oPADs and that their electrochemical characteristics are consistent with the results of finite element simula...
متن کاملElectroanalytical performance of carbon films with near-atomic flatness.
Physicochemical and electrochemical characterization of carbon films obtained by pyrolyzing a commercially available photoresist has been performed. Photoresist spin-coated on to a silicon wafer was pyrolyzed at 1,000 degrees C in a reducing atmosphere (95% nitrogen and 5% hydrogen) to produce conducting carbon films. The pyrolyzed photoresist films (PPF) show unusual surface properties compare...
متن کاملElectrochemistry and electroanalytical applications of carbon nanotubes: a review.
This review addresses recent developments in electrochemistry and electroanalytical chemistry of carbon nanotubes (CNTs). CNTs have been proved to possess unique electronic, chemical and structural features that make them very attractive for electrochemical studies and electrochemical applications. For example, the structural and electronic properties of the CNTs endow them with distinct electr...
متن کاملExperimental investigation on porosity of carbon fiber-reinforced composite using ultrasonic attenuation coefficient
The present work experimentally investigates the correlations between ultrasonic attenuation coefficient and void content with the porosity 0.03%-4.96% of the carbon fiber-reinforced composite (CFRC) samples. The ultrasonic echo immersion bottom reflection technique with 5MHz flat probe is adopted to determine the attenuation coefficient and the metallographic microscope is used to measure the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Electrochemistry
سال: 2020
ISSN: 0021-891X,1572-8838
DOI: 10.1007/s10800-019-01379-y