Ultrasonic Cutting of Rock Materials

Cutting-Tool Materials and Cutting Fluids

The reasons for the availability of a large variety of cutting-tool materials is best appreciated by reviewing the top eight parameters in the first column in Table 22.2 on p. 638. Among various factors, the type of workpiece material machined, the type of operation, and the surface finish and dimensional accuracy required all affect the choice of a cutting-tool material. For example, for inter...

Rock Masses as Construction Materials

A rock mass is a material quite different from other structural materials used in civil engineering. It is heterogeneous and quite often discontinuous, but is one of the materials in the earth's crust, which is most used in man's construction. Ideally, a rock mass is composed of a system of rock blocks and fragments separated by discontinuities forming a material in which all elements behave in...

The Impact of Cutting Tool Materials on Cutting Force

A judicious choice of insert material, tool geometry and cutting conditions can make hard turning produce better surfaces than grinding. In the present study, an attempt has been made to investigate the effect of cutting tool materials on cutting forces (feed force, thrust force and cutting force) in finish hard turning of AISI D2 cold work tool steel. In conclusion of the results obtained with...

Assessment of abrasiveness for research of rock cutting

Rock abrasiveness is ability of rock to wear down the working tool during the mutual interaction between the working indentor and the rock in the mechanical rock cutting process. The cutting indentor is worn down during the interaction, which changes its geometric dimensions causing the enlargement of a contact area between the tool and the rock surface. The changes in these dimensions conseque...

Air-coupled Ultrasonic Testing of Materials