Ultrasonic assisted hot metal powder compaction
نویسندگان
چکیده
منابع مشابه
Experimental Investigation of Metal Powder Compaction without Using Lubricant
The main objective of this work was to design a novel device for compaction of metal powders so that the green parts could be ejected with applying a negligible force and without the need for any lubricant in either an admixed form or applied to the die wall. For this purpose a 40 mm diameter one-piece die was envisaged which would elastically contracted 0.076 mm before compaction and after com...
متن کاملCompaction of Commercially Pure Titanium Powder by Friction Powder Compaction Process
A new friction powder compaction (FPC) process is introduced for compacting commercially pure titanium powder. The FPC process is very simple and energy-efficient since it requires only a rotating tool plunged into an aluminum plate with a hole filled with titanium powder, and no external heat source is necessary. The sintering of the powder is mainly achieved by the friction heat and pressing ...
متن کاملConstitutive Equation for Powder Compaction Incorporating Powder Charecteristics
The increasing importance of powdered materials fabrication has led to an increasing emphasis on the understanding of the powder behavior during compaction. During compaction, a powder mass undergoes densification owing to various mechanisms, i.e. sliding, rotation, deformation and/or fracturing of the constituent particles. These densification mechanisms are very dependent upon the powder char...
متن کاملCompaction dynamics of a magnetized powder.
We have investigated experimentally the influence of a magnetic interaction between the grains on the compaction dynamics of a granular pile submitted to a series of taps. The granular material used to perform this study is a mixture of metallic and glass grains. The packing is immersed in homogeneous external magnetic field. The magnetic field induces an interaction between the metallic grains...
متن کاملA Crystal Plasticity View of Powder Compaction
The cold compaction of an aggregate of powder is treated from the viewpoint of crystal plasticity theory. The contacts between particles are treated as compaction planes which yield under both normal and shear straining. The hardening of each plane represents both geometric and material hardening at the contacts between particles; the macroscopic tangent stiffness can be written in terms of the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ultrasonics Sonochemistry
سال: 2017
ISSN: 1350-4177
DOI: 10.1016/j.ultsonch.2016.09.025