Ultralow power consumption gas sensor based on a self-heated nanojunction of SnO2 nanowires
نویسندگان
چکیده
منابع مشابه
application of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولThe Effects of Nano In2O3 and ZnO on the CO Gas Detection of the SnO2 Sensor
The pellet-type SnO2 sensor was synthesized by the solid state method and the effects of additives such as nano ZnO (1-12 mol %) and nano In2O3 (1-10 mol %) on the CO gas sensitivity of sensor were investigated. The optimum sintering temperature was chosen 800°C because of the porosity content of the samples. The phase analysis and microstructure of the samples were studied by x-ray diffraction...
متن کاملPolyethylene glycol-directed SnO2 nanowires for enhanced gas-sensing properties.
SnO(2) nanowires with lengths in the tens of micrometres range have been synthesized on a large scale via a facile polyethylene glycol-directed method at ambient temperature followed by a suitable thermal treatment of the precursor nanowires. The morphology of the precursor of the SnO(2) nanowires is tunable by changing the concentration of either SnCl(2) or polyethylene glycol. After calcinati...
متن کاملFully inkjet printed SnO2 gas sensor on plastic substrate
A tin dioxide (SnO2) sensor was fabricated by inkjet printing onto polyimide foil. Gold electrodes and heater were printed on each side of the substrate. A SnO2 based ink was developed by sol-gel method and jetted onto the electrodes. A final annealing at 400°C compatible with the polymeric transducers allowed to synthetize the SnO2 sensing film. Electrical measurements were carried out to char...
متن کاملA Novel Flexible Room Temperature Ethanol Gas Sensor Based on SnO2 Doped Poly-Diallyldimethylammonium Chloride
A novel flexible room temperature ethanol gas sensor was fabricated and demonstrated in this paper. The polyimide (PI) substrate-based sensor was formed by depositing a mixture of SnO2 nanopowder and poly-diallyldimethylammonium chloride (PDDAC) on as-patterned interdigitated electrodes. PDDAC acted both as the binder, promoting the adhesion between SnO2 and the flexible PI substrate, and the d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RSC Advances
سال: 2018
ISSN: 2046-2069
DOI: 10.1039/c8ra06061d