Ultra-Wideband 3-D Microwave Absorbers With Composite Slotlines and Microstrip Lines: Synthetic Design and Implementation
نویسندگان
چکیده
This article proposes a class of ultra-wideband 3-D microwave absorbers with composite slotlines and microstrip lines from synthetic design to practical implementation. Firstly, the general equivalent transmission line (TL) model proposed absorber element is formed based on two sets shunt short-ended stubs an i-section nonuniform connecting line. Then, procedure theoretically investigated using TL model, aiming construct ultra-wide absorption band Chebyshev equal-ripple response. According prescribed absorptive performance, such as maximum reflection coefficient (C) fractional bandwidth (FBW), relevant parameters can be directly calculated by established synthesis approach. To validate concept, prototypes, namely, absorber-I (i=1) absorber-II (i=2), are designed, fabricated, measured. Each prototype applies simple structure composed slotlines, lines, only one load, which all etched single-layered substrate. Measured results agree well synthetizations simulations. For absorber-I, measured 95.5% in frequency range 5.08 14.44GHz successfully realized. Absorber-II obtains FBW 111.1% 4.48 15.68GHz. Average ratios within operating higher than 93.8% for absorber-II, respectively. Besides, angularly stable 600 oblique incidence. Therefore, structures possess attractive potential effectively absorbing electromagnetic waves.
منابع مشابه
The Design and Implementation of Ultra- wideband Microwave Amplifier
Equivalent gain amplification and broadband networks matching of weak microwave signal are difficult in Ultra-wideband microwave receiver system. A highly integrated amplifier IC ADL5541 from ADI is adopted as the core unit in this paper, coordinate with an external matching network. The design can realize an Ultrawideband microwave amplifier with 15dB gain which works in the 500~4000MHz with +...
متن کاملUltra Wideband Microwave Multi-Port Relectometer in Microstrip-Slot Technology: Operation, Design and Applications
متن کامل
Design and Fabrication of Ultra Wideband Microstrip Antenna for Ultra Wideband Applications
All Rights Reserved © 2016 IJARECE 2335 Abstract— In this paper, an Ultra Wideband antenna for UWB applications and a coplanar Waveguide Feed is presented. The size of the antenna is 25 mm x 25 mm x 1.6 mm 3 and it is prototyped on FR-4 epoxy substrate material which has a dielectric constant of 4.4 at a frequency of 3.03 GHz. The proposed antenna provides a bandwidth of 11.36 GHz from 10.44 GH...
متن کاملDesign and Implementation of Microwave Dual-Band Bandpass Filters Using Microstrip Composite Resonators
In this paper, a novel type of dual-band bandpass filter (DBBPF) is proposed by using microstrip composite resonators, and its design method is developed based on the lumped-element equivalent circuit of the filter. Both the midband frequencies and the passband widths of the dual bands of the filter can be controlled separately. Four DBBPFs with different specifications are designed, fabricated...
متن کاملRadar Sensing Using Ultra Wideband – Design and Implementation
Ultra-wideband (UWB) has received significant attention for applications in target positioning and wireless communications recently. The extremely short pulses in turn generate a very wide bandwidth and offer several advantages, such as large throughput, covertness, robustness to jamming, lower power, and coexistence with current radio services. UWB not only can transmit a huge amount of data o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Open Journal of Antennas and Propagation
سال: 2023
ISSN: ['2637-6431']
DOI: https://doi.org/10.1109/ojap.2023.3252676