Ultra-high-performance concrete with local high unburned carbon fly ash
نویسندگان
چکیده
Ultra-high-performance concrete (UHPC) is a kind of high-tech cementitious material with superb mechanical and durability properties compared to other types concrete. However, due the high content cement silica fume used, cost environmental impact UHPC considerably higher than conventional For this reason, several efforts around world have been made develop greener less expensive local pozzolans. This study aimed design produce using fly ash available in Colombia. A numerical optimization, based on Design Experiments (DoE) multi-objective criteria, was performed obtain mixture proper flow highest compressive strength, while simultaneously having minimum cement. The results showed that, despite low quality ashes Colombia, strength values 150 MPa without any heat treatment can be achieved.
منابع مشابه
High-performance, High-volume Fly Ash Concrete for Sustainable Development
For a variety of reasons, the concrete construction industry is not sustainable. First, it consumes huge quantities of virgin materials. Second, the principal binder in concrete is portland cement, the production of which is a major contributor to greenhouse gas emissions that are implicated in global warming and climate change. Third, many concrete structures suffer from lack of durability whi...
متن کاملDurability of High-performance Concrete with Fly Ash
High-performance concrete (HPC) is usually produced using high quality materials. These high quality constituents drastically increase the initial cost of HPC, hence hindering its more widespread use. Therefore, the main goal of this research project was to produce a low cost enhanced performance concrete or even a low cost HPC, using low quality fly ash and locally available crushed aggregates...
متن کاملEffect of High-Carbon Fly Ash on the Electrical Resistivity of Fly Ash Concrete Containing Carbon Fibers
Two series, each consisting of seven high-volume fly ash concrete mixtures with conductive carbon fibers, were used in this investigation. The first series of the concrete mixtures contained ASTM Class C fly ash and 0, 1, 3, 5, 7.5, 10, and 20 lbs. carbon fibers per cubic yard of concrete. The second series of concrete mixtures contained high-carbon fly ash in addition to the materials used in ...
متن کاملModeling of the Unburned Carbon in Fly Ash
Numerical simulation of the content of unburned carbon in fly ash on the 300MW tangentially pulverized coal fired boiler is performed by the numerical simulation software COALFIRE, which is based on international advanced TASCFLOW software platform. Firstly, take the result of calculation of number value as the sample, and then set up the support vector machine model of unburned carbon content ...
متن کاملHigh Performance Bricks from Fly Ash
Bricks whose solid ingredient is 100% fly ash have been manufactured. The manufacturing process uses techniques and equipment similar to those used in clay brick factories. The bricks produced were about 28% lighter than clay bricks. The bricks manufactured from fly ash possessed compressive strength higher than 40 MPa. This exceeds some of the best of load carrying clay bricks available by mor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Dyna-colombia
سال: 2021
ISSN: ['0012-7353', '2346-2183']
DOI: https://doi.org/10.15446/dyna.v88n216.89234