Ultra-Fine Grains in Ultra Low Carbon IF Steel Highly Strained by ARB
نویسندگان
چکیده
منابع مشابه
Ultra-fine Grained Bulk Steel Produced by Accumulative Roll-bonding (arb) Process
Much attention has been directed recently to ultra-grain refining of metallic materials, where the grain size is reduced to less than 1 mm. It is expected that submicrometer grained structure would result in high strength and toughness at ambient temperature [1] as well as high strain rate or low temperature superplasticity at elevated temperatures [2,3]. It has been reported recently that ultr...
متن کاملIsothermal Recrystallization Behavior of Cold-deformed Martensite in an Ultra-low-carbon Microalloyed Steel
One of the most promising ways to produce a grain-refined microstructure in some steel materials is the thermomechanical processing route of subcritical recrystallization annealing of a cold-deformed martensite structure. In the present study, the microstructural evolutions and the associated recrystallization kinetics under various subcritical annealing heat treatment conditions are explored i...
متن کاملExperimental study of formability of friction stir welded ultra-thin sheets of IF steel
In this paper, the experimental investigation of formability of friction stir welded ultra-thin sheets of IF steel is investigated experimentally. First, the sheets are joined by friction stir welding process based on the tests determined according to the Taguchi design of experiments. The investigated parameters in the welding process are as tool rotational and traverse speeds. Then, the tailo...
متن کاملExperimental study of formability of friction stir welded ultra-thin sheets of IF steel
In this paper, the experimental investigation of formability of friction stir welded ultra-thin sheets of IF steel is investigated experimentally. First, the sheets are joined by friction stir welding process based on the tests determined according to the Taguchi design of experiments. The investigated parameters in the welding process are as tool rotational and traverse speeds. Then, the tailo...
متن کاملULTRA FINE FERRITE FORMATION IN Si-Mn TRIP STEELS
Abstract: In the present investigation, the effects of thermomechanical processing parameters and the steel chemical composition on the ultra fine ferrite formation characteristics were studied. This was programmed relying on the capabilities of strain induced transformation (SIT) phenomenon and applying to different grades of Si-Mn TRIP (Transformation Induced Plasticity) steels. According...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materia Japan
سال: 2000
ISSN: 1340-2625,1884-5843
DOI: 10.2320/materia.39.961