Ultimate Strength of Quasi-Isotropic Composites: ISO 12215-5:2019 Validation
نویسندگان
چکیده
Discussion
 With the incorporation of International Journal Small Craft Technology into IJME, it is always good to see papers direct concern small craft design community. The process on-going validation scantling rule formulae also be welcomed. authors are commended on both counts. Word count restricts comments/questions ultimate flexural strength hand-laminated panels (Table 5).
منابع مشابه
Predicting High Temperature Ultimate Strength of Continuous Fiber Metal Matrix Composites
A model to predict the high temperature ultimate strength of a continuous fiber metal matrix composite (CFMMC) has been developed. The model extends the work of Rosen by including high temperature processes such as matrix creep, fiber-matrix debond~ and the effects of randomly spaced fiber breaks which typically exist in the MMC prior to loading. A finite element model (FEM), developed in the f...
متن کاملPrediction of ultimate strength of shale using artificial neural network
A rock failure criterion is very important for prediction of the ultimate strength in rock mechanics and geotechnics; it is determined for rock mechanics studies in mining, civil, and oil wellborn drilling operations. Also shales are among the most difficult to treat formations. Therefore, in this research work, using the artificial neural network (ANN), a model was built to predict the ultimat...
متن کاملValidation of performance of ISO 14001 through developed model
The case study is based on ISO 14001 and compares the validation with other certified industries. In view of the above, response has been collected to have further improvements through developed model which was prepared based on the factorization of various input and output variables which is linked to the clauses of ISO 14001. The developed model has represented almost all the clauses of ISO 1...
متن کاملUltimate tensile strength of tooth structures.
OBJECTIVE This study determined the ultimate tensile strength (UTS) of enamel (E), dentin (D) and dentin-enamel junction (DEJ) using the microtensile technique. It was hypothesized that the UTS of dental structures varies according to location and nature. METHODS Intact occlusal enamel surfaces from extracted human third molars were etched with 37% phosphoric acid and bonded with a one-bottle...
متن کاملIsotropic microwave composites with negative refraction
The properties of artificial isotropic microwave composites which would possess simultaneously negative permittivity and permeability are studied theoretically. Four kinds of composites are considered. Two of them concern media with split-ring resonator particles with different particle arrangements. The other two are realized with Omega particles. An analytical antenna model of the electromagn...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Maritime Engineering
سال: 2023
ISSN: ['1740-0716', '1479-8751', '1740-2700']
DOI: https://doi.org/10.5750/ijme.v164ia4.1260