ULTIMATE STRENGTH EQUATIONS OF REINFORCED CONCRETE MEMBERS AT BRITTLE FAILURE

"ultimate Strength of Members of Reinforced Concrete Frames in Combined Bending and Torsion

Shear strength model of reinforced concrete circular cross-section members

A shear capacity model of reinforced concrete members with circular cross section transversely reinforced with circular hoops has been developed. The proposed model is based on the truss analogy by adding a concrete contribution term to the capacity of the shear reinforcement. An additional deviatoric shear resisting th c curv pres nism ste ved und ctor mechanism of hoops present solely in memb...

Effect Of Web Reinforcement On Ultimate Strength Of Reinforced Concrete Deep Beam

It is observed that, reinforced concrete beams failed due to flexure but in case of deep beam failure occur due to shear. Deep beams may be defined as the beam where shear span to depth ratio less than 2. A number of researchers already proposed various approach to predict the ultimate strength of deep beams. In this study a newer approach is developed to calculate the ultimate shear strength o...

Bond Deformability of Reinforced Concrete Members

The usual earthquake resistant design philosophy of ductile frame buildings allows the beams to form plastic hinges adjacent to beam-column connections. In order to carry out this design philosophy, the ultimate bond or shear strength of the beam should be greater than the flexural yielding force and should not degrade before reaching its required ductility. The behavior of RC members dominated...

Strength and Toughness of Reinforced Concrete with Coated Steel Fibers

The effect of zinc phosphate (ZP) and zinc calcium phosphate (ZCP) coatings on the reinforcing mechanisms of smooth steel fiber in cementitious matrix have been studied. The results of pull out tests illustrated that by coating smooth steel fiber the pull-out load may be increased up to 100%. The effect of zinc phosphate coating on interface bonding was more than zinc-calcium phosphate coating....