Ultimate Limit State Assessment of Timber Bolt Connection Subjected to Double Unequal Shears
نویسندگان
چکیده
منابع مشابه
Behaviour of a Timber-Concrete Composite Beam with Glued Connection at Strength Limit State
The paper reports the results of a collapse test performed on a 6 m span timber-concrete composite beam with glued re-bar connection. The beam was first ramp loaded to failure, then some push-out tests were performed on specimens cut from the end of the beam in order to fully characterise the connection. During the tests all relevant quantities such as deflections, slips and strains were monito...
متن کاملUltimate limit to human longevity
Are there limits to human longevity? We suggest a new demographic model to describe human demographic trajectories. Specifically, the model mathematically defines the limits of longevity. Through the demographic analysis of trends for Sweden (between 1751 and 2002), Switzerland (between 1876 and 2002) and Japan (between 1950 and 1999), which are the longest-lived countries, we would like to dem...
متن کاملSeismic Response of Adjacent Unequal Buildings Subjected to Double Pounding Considering Soil-Structure Interaction
Denise-Penelope N. Kontoni 1,* and Ahmed Abdelraheem Farghaly 2,* 1 Department of Civil Engineering, Technological Educational Institute of Western Greece, GR-26334 Patras, Greece 2 Department of Civil and Architectural Constructions, Faculty of Industrial Education, Sohag University Sohag 82524, Egypt * Correspondence: [email protected] (D.-P.N.K.); [email protected] (A.A.F.); Tel...
متن کاملBolted Connection Strength and Bolt Hole Size
This study investigated the effects of oversized bolt holes on the properties of bolted connections with steel side members. The intent of the study was to determine (1) how well the European Yield Model (EYM) predicts experimental results for connections with oversized bolt holes and (2) how the loaddeformation behavior of connections is affected by oversized and/or misdrilled holes. Variables...
متن کاملUltimate Load Capacity and Behavior of Thin-Walled Curved-Steel Square Struts, Subjected to Compressive Load
There have been some experimental tests on hollow curved-steel struts with thin-walled square sections, in order to investigate their general behavior, particularly their capacity for bearing differing loads. One set of square tubes are cold-formed into segments of circular arcs with curvature radii, equal to 4000 mm. Different lengths of curved struts are fabricated so as to cover a practical ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2017
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/245/2/022083