Two-way Shape Memory Effect and Mechanical Resonance Properties of Shape-Memory-Alloy-Coated Magnetic Ribbons
نویسندگان
چکیده
منابع مشابه
Transformation of Embedded Shape Memory Alloy Ribbons
Shape memory alloy (SMA) wires can be embedded in a host material to alter the stiffness or modal response and provide vibration control. The interaction between the embedded SMA and the host material is critical to applications requiring transfer of loads or strain from the wire to the host. Although there has been a significant amount of research dedicated to characterizing and modeling the r...
متن کاملTwo-way shape memory effect of a TiNiHf high temperature shape memory alloy
The two-way shape memory effect in a Ti36Ni49Hf15 high temperature shape memory alloy (SMA) has been systematically studied by bending tests. In the TiNiHf alloy, the martensite deformation is an effective method to get two-way shape memory effect even with a small deformation strain. When the TiNiHf alloy is deformed at a full martensite state, the deformation mechanism is the martensite orien...
متن کاملMartensitic transformation and magnetic properties of Co–Ni–Al shape memory alloy ribbons
We report on the magnetic and martensitic transformation properties of Co39Ni33Al28 ferromagnetic shape memory alloy ribbons. We found that the phase formation of Co39Ni33Al28 is strongly dependent on the method of preparation. The conventional as-cast ingot sample contains a large amount of the γ phase embedded in the primary β phase, while melt-spun ribbons contain the pure β phase. Co39Ni33A...
متن کاملShape Memory Properties in Cu-Zn-Al Alloy
In this research a Cu-Zn-Al alloy is produced by melting the raw materials in an electric resistance furnace and then pouring it into a steel mould. The optimum way to achieve the final analysis in the hypo-eutectoid range is determined and the influence of the alloying element, Ti on the grain size and the shape memory properties of the samples are investigated. Solution treatment (done at 850...
متن کاملShape Memory Properties in Cu-Zn-Al Alloy
In this research a Cu-Zn-Al alloy is produced by melting the raw materials in an electric resistance furnace and then pouring it into a steel mould. The optimum way to achieve the final analysis in the hypo-eutectoid range is determined and the influence of the alloying element, Ti on the grain size and the shape memory properties of the samples are investigated. Solution treatment (done at 850...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Magnetics Society of Japan
سال: 2010
ISSN: 1882-2932,1882-2924
DOI: 10.3379/msjmag.1009r002