Two-Way Flexural Behavior of Donut-Type Voided Slabs
نویسندگان
چکیده
منابع مشابه
Calculation of Voided Slabs Rigidities
A theoretical study of the rigidities of slabs with circular voids oriented in the longitudinal and in the transverse direction is discussed. Equations are presented for predicting the bending and torsional rigidities of the voided slabs. This paper summarizes the results of an extensive literature search and initial review of the current methods of analyzing voided slab. The various methods of...
متن کاملPunching strength of actual two-way slabs
Many building codes rely on empirical formulations with respect to the punching shear design provisions. Such empirical equations are typically calibrated on the basis of laboratory tests performed on simplified geometries (usually isolated specimens) with usually statically-determined loading conditions. On the contrary, actual structures, particularly two-way slabs, are continuous and highly ...
متن کاملStrengthening of Existing RC Two-Way Slabs using New Combined FRP fabric/rod Technique
This study presents the results of an experimental program to investigate the effectiveness of an innovative combined FRP technique using combination of externally bonded (EB) FRP fabrics and near surface mounted (NSM) FRP rods for flexural strengthening of existing reinforced concrete (RC) two-wayslabs with low clear cover thickness. Three full-scale RC slabs (1500×1500×120 mm) were tested und...
متن کاملInfluence of reinforcement arrangement in flexural fire behavior of hollow core slabs
This paper describes four standard scale fire tests conducted on precast prestressed hollow core slabs under flexure. The influence of the reinforcement arrangement was investigated using two test parameters: the average axis distance (from 30.1 to 46.7 mm), and the type of reinforcement (5 mm diameter wires and 9.5mm diameter strands). An ISO 834 standard fire was applied maintaining the load ...
متن کاملExperimental Strengthening of the Two-way Reinforced Concrete Slabs with High Performance Fiber Reinforced Cement Composites Prefabricated Sheets
Reinforced concrete structures need to be strengthened and retrofitted for various reasons, including errors during design and/or construction, so in most cases strengthening of structural elements is much more economical than rebuilding the structure. Using HPFRCC with tensile stiffening behavior has been developed to strengthen the concrete structures over the recent few years. In this paper,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Concrete Structures and Materials
سال: 2018
ISSN: 1976-0485,2234-1315
DOI: 10.1186/s40069-018-0247-6