Two-Stage Evaporative Inlet Air Gas Turbine Cooling
نویسندگان
چکیده
Gas turbine inlet air-cooling (TIAC) is an established technology for augmenting gas output and efficiency, especially in hot regions. TIAC using evaporative cooling suitable hot, dry regions; however, the limited by ambient wet-bulb temperature. This study investigates two-stage under harsh weather of Riyadh city. The system consists indirect direct stages. In stage, air precooled water cooled a tower. adiabatic saturation cools air. investigation was conducted GE 7001EA model. Thermoflex software used to simulate different systems including evaporative, hybrid absorption refrigeration vapor-compression systems. Comparisons performance parameters turbines were conducted. added annual profit payback period estimated
منابع مشابه
Parametric Analysis of Cooled Gas Turbine Cycle with Evaporative Inlet Air Cooling
The article investigates the effect of compressor pressure ratio, turbine inlet temperature and ambient temperature on the performance parameters of an air-cooled gas turbine cycle with evaporative cooling of inlet air. Air f ilm cooling has been adopted as the cooling technique for gas turbine blades. The mass of coolant required for turbine blade cooling is calculated f or a selected range of...
متن کاملPerformance Improvement of a Regenerative Gas Turbine Cycle Through Integrated Inlet Air Evaporative Cooling and Steam Injection
Like many developed countries, energy efficiency and environment impact are the most important process in the development of power generation policy in India. A high ambient temperature reduces the air density and makes inlet air cooling (IAC) and steam injection gas turbine (STIG) attractive power augmentation method for existing regenerative gas turbine. With a high back work ratio and a high...
متن کاملIntegration of steam injection and inlet air cooling for a gas turbine generation system
The temperature of exhaust gases from simple cycle gas turbine generation sets (GENSETs) is usually very high (around 500 C), and a heat recovery steam generator (HRSG) is often used to recover the energy from the exhaust gases and generate steam. The generated steams can be either used for many useful processes (heating, drying, separation etc.) or used back in the power generation system for ...
متن کاملExergy, Economic and Environmental Analyses of Gas Turbine Inlet Air Cooling with a Heat Pump Using a Novel System Configuration
Gas turbines incur a loss of output power during hot seasons due to high ambient air temperatures, and input air cooling systems are often used to partly offset this problem. Here, results are reported for an investigation of the utilization of a heat pump to cool the inlet air of a gas turbine compressor. The analyses are carried out for two climates: the city of Yazd, Iran, which has a hot, a...
متن کاملNumerical investigation of clocking in a two-stage gas turbine
Flow in the first two-stage of V 94.2 gas turbine is simulated numerically. In this turbine, the second stator is clocked relative to the first stator to different positions. Steady-state analysis was carried out by varying the circumferential relative position of the consecutive stator vanes to study the effects of the clocking on turbine performance. A density based compressible inviscid ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2021
ISSN: ['1996-1073']
DOI: https://doi.org/10.3390/en14051382