Two-scale modeling of fracturing solids using a smeared macro-to-micro discontinuity transition
نویسندگان
چکیده
منابع مشابه
On the crack propagation modeling of hydraulic fracturing by a hybridized displacement discontinuity/boundary collocation method
Numerical methods such as boundary element and finite element methods are widely used for the stress analysis in solid mechanics. This study presents boundary element method based on the displacement discontinuity formulation to solve general problems of interaction between hydraulic fracturing and discontinuities. The crack tip element and a higher order boundary displacement collocation techn...
متن کاملModeling of the beam discontinuity with two analyses in strong and weak forms using a torsional spring model
In this paper, a discontinuity in beams whose intensity is adjusted by the spring stiffness factor is modeled using a torsional spring. Adapting two analyses in strong and weak forms for discontinuous beams, the improved governing differential equations and the modified stiffness matrix are derived respectively. In the strong form, two different solution methods have been presented to make an a...
متن کاملModeling of the Beam Discontinuity with Two Analyses in Strong and Weak Forms using a Torsional Spring Model
In this paper, a discontinuity in beams whose intensity is adjusted by the spring stiffness factor is modeled using a torsional spring. Adapting two analyses in strong and weak forms for discontinuous beams, the improved governing differential equations and the modified stiffness matrix are derived respectively. In the strong form, two different solution methods have been presented to make an a...
متن کاملon the crack propagation modeling of hydraulic fracturing by a hybridized displacement discontinuity/boundary collocation method
numerical methods such as boundary element and finite element methods are widely used for the stress analysis in solid mechanics. this study presents boundary element method based on the displacement discontinuity formulation to solve general problems of interaction between hydraulic fracturing and discontinuities. the crack tip element and a higher order boundary displacement collocation techn...
متن کاملSimulation and modeling of macro and micro components produced by powder injection molding: A review
During the recent years powder processing technologies have gained much attention due to the less energy consumption and recyclable powders. Manufacturing of complicated parts by the conventional powder metallurgy (PM) method is hard due to the uniaxial pressure, which leads to the low design flexibility. In order to prevail these constraints, powder injection molding (PIM) process, which inclu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Computational Mechanics
سال: 2017
ISSN: 0178-7675,1432-0924
DOI: 10.1007/s00466-017-1426-z