Two-Port Network Theory-Based Design Method for Broadband Class J Doherty Amplifiers
نویسندگان
چکیده
منابع مشابه
Theory and Design of Wideband Doherty Power Amplifiers
The Doherty power amplifier (DPA) is one of the most popular power amplifier architectures for obtaining high average efficiency for modern communication signals with high peak-to-average power ratios (PAPR). However, the DPA suffers from often having narrowband performance which limits its capabilities in wideband and/or multi-standard microwave and radio frequency applications. In this thesis...
متن کاملAdvanced design features of Doherty power amplifiers
A Doherty power amplifier (DPA) is an effective structure born in 1936 which, after a scarce revival around year 2000), had been strengthened from 2005 because its capability to combine linear amplification with power efficiency. Despite the conceptual simplicity of its basic operation, a lot of practical drawbacks shrink the theoretical behavior, thus leading a significant number of research w...
متن کاملDesign Equations for Class-E Power Amplifiers
In literature, it is widely accepted that the design of Class-E Power Amplifier (PA) with finite dc feed inductance requires a long iterative solution procedure. To avoid such iterative solution methods, analytical design equations should be known. The problem associated with the finite dc feed inductance Class-E PA is usually ascribed to the fact that the circuit element values are transcenden...
متن کاملHigh-Power Inverted Doherty Power Amplifier for Broadband Application
Abstract This paper presents a high-power inverted Doherty power amplifier for broader operational bandwidth. After analyzing two operation modes according to the load modulation of the Doherty power amplifier, the inverted Doherty structure was selected. In the design, the load impedances for optimum broadband characteristics at both the back-off and peak power levels. The Doherty power amplif...
متن کاملA five-port deembedding method for floating two-port networks
Radio frequency (RF) high-power bipolar transistors are often constructed with the collector accessible at the bottom of the device. Characterization is carried out on substrate mounted devices. The classical methods developed for the “on wafer” capacitance–voltage (CV) and alternating current (ac) measurement of grounded devices are then no longer applicable. A (general) deembedding algorithm ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Access
سال: 2019
ISSN: 2169-3536
DOI: 10.1109/access.2019.2911891