Two-phase frictional pressure drop in horizontal micro-scale channels: Experimental data analysis and prediction method development
نویسندگان
چکیده
منابع مشابه
Two Phase Frictional Pressure Drop of Carbon Dioxide in Horizontal Micro Tubes
Two-phase frictional pressure drop data were obtained for condensation of carbon dioxide in single horizontal micro tube of inner diameter ranged from 0.6 mm up to 1.6 mm over mass flow rates from 2.5*10 to 17*10 kg/s and vapor qualities from 0.0 to 1.0. The inlet condensing pressure is changed from 33.5 to 45 bars. The saturation temperature ranged from -1.5 C up to 10 C. These data have then ...
متن کاملCFD Analysis of Two Phase Flow in a Horizontal Pipe – Prediction of Pressure Drop
In designing of condensers, the prediction of pressure drop is as important as the prediction of heat transfer coefficient. Modeling of two phase flow, particularly liquid – vapor flow under diabatic conditions inside a horizontal tube using CFD analysis is difficult with the available two phase models in FLUENT due to continuously changing flow patterns. In the present analysis, CFD analysis o...
متن کاملUniversal approach to predicting two-phase frictional pressure drop for mini/micro-channel saturated flow boiling
This paper is a part of a recent series of studies by the authors to develop universal predictive tools for pressure drop and heat transfer coefficient for mini/micro-channel flows that are capable of tackling fluids with drastically different thermophysical properties and very broad ranges of all geometrical and flow parameters of practical interest. In this study, a new technique is proposed ...
متن کاملMeasurement and prediction of pressure drop in two-phase micro-channel heat sinks
This study explores hydrodynamic instability and pressure drop in a water-cooled two-phase micro-channel heat sink containing 21 parallel 231 713 lm micro-channels. Two types of two-phase hydrodynamic instability were identified: severe pressure drop oscillation and mild parallel channel instability. It is shown the severe pressure drop oscillation, which can trigger pre-mature critical heat fl...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Refrigeration
سال: 2017
ISSN: 0140-7007
DOI: 10.1016/j.ijrefrig.2017.03.024