Twinning in polycrystalline aluminium deformed by dynamic channel angular pressing
نویسندگان
چکیده
منابع مشابه
Size effect in equal channel angular pressing (ECAP) process
The influence of the sample size (diameter while keeping the length constant) in equal channel angular pressing (ECAP) of pure aluminum is examined using finite element method (FEM) and experiment. Different sized aluminum rods were processed via ECAP and the effect of sample size on the strain homogeneity, process load, and the ratio of the friction to the total force were evaluated. The resul...
متن کاملRe-strengthening in AA6063 Alloy During Equal Channel Angular Pressing
Equal channel angular pressing (ECAP) is carried out using two different configurations for the exit channel of the ECAP die, i.e., relieved and choked, with angles of 0.2 °. It is found that using a die with relieved exit channel, the sample was extruded for 6 passes with no surface cracks and an average cell size of 727 nm and a fraction of high angle grain boundaries of 54 % were achieved. M...
متن کاملEqui-Channel Angular Pressing
Equal channel angular Pressing (ECAP) is an innovative technique for developing ultrafine-grained microstructures first developed by Segal et al in 1981 in the former Soviet Union. The ECAP method consists of two channels that intersect at an angle, generally comprised between 90◦ and 135◦ . The deformation is produced by shear as the billet is extruded through the channels. One of the geometri...
متن کاملPlastic deformation analysis in parallel tubular channel angular pressing (PTCAP)
Parallel tubular channel angular pressing (PTCAP) process is a novel recently developed severe plastic deformation technique for fabrication of ultrafine grained (UFG) metallic tubes. This new process consists of two half cycles and is affected by several parameters such as channel angles, deformation ratio and curvature angles. In this paper, the effects of these parameters on the plastic defo...
متن کاملDissolution of the θ′ Precipitates in an Al-1.7at.%Cu Alloy Deformed by Equal-Channel Angular Pressing+
The microstructural evolution during the equal channel angular (ECA) pressing process of an α+ θ′ two-phase Al-1.7at.%Cu alloy has been studied by transmission electron microscopy (TEM) and energy-filtered transmission electron microscopy (EF-TEM). The θ′ precipitates are fragmented into fine particles after a few passes of ECA perssing. The θ′ precipitates are almost completely dissolved after...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Letters on Materials
سال: 2017
ISSN: 2218-5046,2410-3535
DOI: 10.22226/2410-3535-2017-4-363-366