Turning-Surface Roughness Measurement by Slit Aperture Width Vibration.
نویسندگان
چکیده
منابع مشابه
Surface Roughness Control Simulation of Turning Processes
The machining quality on computerized numerically controlled (CNC) machine tools is sensitive to the machining parameters. With modern machine tools, an operator still manually adjusts controlling parameters, such as feed rate and cutting speed. The adjusted values mainly depend on operator experience and knowledge. Standard machining catalogues and commercial cutting condition prediction softw...
متن کاملOptimization of Surface Roughness and Vibration in Turning of Aluminum Alloy AA2024 Using Taguchi Technique
Determination of optimal conditions of machining parameters is important to reduce the production cost and achieve the desired surface quality. This paper investigates the influence of cutting parameters on surface roughness and natural frequency in turning of aluminum alloy AA2024. The experiments were performed at the lathe machine using two different cutting tools made of AISI 5140 and carbi...
متن کاملOn-line surface roughness recognition system by vibration monitoring in CNC turning using adaptive neuro-fuzzy inference system (ANFIS)
This study presents a new method for modeling an adaptive neuro-fuzzy inference system (ANFIS) based on vibration for predicting surface roughness in the CNC turning process. The input parameters of the model are insert nose radius, cutting speed, feed rate, depth of cut and vibration amplitude, which determine the output parameter of the surface roughness. A Gauss type membership function was ...
متن کاملAbsolute measurement of surface roughness.
In an interferometer which uses a reference surface, the measured surface heights correspond to the difference between the test and reference surfaces. To accurately determine the rms roughness of supersmooth surfaces, the effects of the reference surface roughness need to be removed. One technique for doing this involves averaging a number of uncorrelated measurements of a mirror to generate a...
متن کاملExperimental Study of Induced Vibration and Work Surface Roughness in the Turning of 41Cr4 Alloy Steel using Response Surface Methodology
This study investigates experimentally the relationship between induced vibration and surface roughness in turning of 41Cr4 Alloy steel using Response Surface Methodology RSM. The levels of process cutting parameters in the study are limited to the following data; Depth of cut (1.0, 2.0, 3.0 mm), cutting speed (260, 320, 400 rpm), feed rate (0.15, 0.20, 0.30 mm/rev), tool nose radius (0, 1, 2 m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1991
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.57.1097