Turbulent jet characteristics for axisymmetric and serrated nozzles
نویسندگان
چکیده
منابع مشابه
Turbulent jet characteristics for axisymmetric and serrated nozzles
Turbulent jet large eddy simulations (LES) are performed at Mach 0.9 and Reynolds number around 10. Implicit large-eddy simulation (ILES) is employed, namely omitting explicit subgrid scale models. The Reynolds-averaged Navier-Stokes (RANS) solution is blended into the near wall region. This makes an overall hybrid LES-RANS approach. A Hamilton-Jacobi equation is applied to remove the disparate...
متن کاملLinear Stability Implications of Mean Flow Variations in Turbulent Jets Issuing from Serrated Nozzles
Nozzle serrations or chevrons are being deployed for reducing the noise from jet engines. The turbulent mean flow field of such jets takes on a serrated character, and the linear stability eigenspectrum for such serrated mean flows determines the evolution of the coherent wavepackets that are linked to the aft angle noise radiated. In particular, the lower the growth rate and phase speed of the...
متن کاملIgnition Characteristics of Turbulent Jet Flows
Releases of flammable materials from chemical plant are a hazard since their dispersion down to safe levels only occurs at some distance from their source. Within this distance, accidental ignition can give rise to fires or explosions. This paper describes the development of computational fluid dynamic models capable of predicting the ignition hazards presented by turbulent releases of flammabl...
متن کاملTurbulent characteristics in flow subjected to bed suction and jet injection as a pier-scour countermeasure
The effect of a combined system of the bed suction and jet injection as a pier-scour countermeasure on the turbulent flow field is studied in a laboratory flume using an Acoustic Doppler Velocimeter (ADV). The three components of the velocities in the vertical symmetry plane in the equilibrium scour hole in front and rear of the pier under 3-jet injections and bed suction rate Qs/Q0 = 2%located...
متن کاملParabolized Stability Analysis of Jets Issuing from Serrated Nozzles
The mixing noise in jet engine exhaust is one of the main noise sources in aviation. Nozzle lip serrations, commonly called chevrons, are one of the technologies deployed to address the issue in modern civilian aircraft. These nozzle serrations impinge on the shear layer and change its dynamics; the jet plume becomes lobed or serrated near the nozzle in a time-averaged sense, but reverts to a r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Computers & Fluids
سال: 2015
ISSN: 0045-7930
DOI: 10.1016/j.compfluid.2014.09.035