Turbulent flame propagation with large chemical-heat release
نویسندگان
چکیده
منابع مشابه
Simulations of edge-flame propagation in turbulent non-premixed jets
Ignition, flame propagation and stabilisation have been simulated and analysed in a turbulent jet of non-premixed methane and air. The first order Conditional Moment Closure (CMC) turbulent combustion model was fully coupled with a Reynolds-Averaged Navier Stokes (RANS) flow simulation. A CMC model was developed to account for spark ignition. The over-prediction of turbulent flame propagation w...
متن کاملPremixed-Flame Propagation in Turbulent Taylor–Couette Flow
Turbulent-flame speeds in methane–air mixtures were measured in a Taylor–Couette apparatus with counter-rotating cylinders, used to generate turbulence that is nearly homogeneous and isotropic over many integral length and time scales. While laminar-flame propagation is found to be influenced by the Darrieus– Landau instability and heat loss to the walls of the apparatus, turbulent-flame propag...
متن کاملLarge-eddy simulation of a turbulent piloted methaneÕair diffusion flame „Sandia flame D..
The Lagrangian Flamelet Model is formulated as a combustion model for large-eddy simulations of turbulent jet diffusion flames. The model is applied in a large-eddy simulation of a piloted partially premixed methane/air diffusion flame ~Sandia flame D!. The results of the simulation are compared to experimental data of the mean and RMS of the axial velocity and the mixture fraction and the unco...
متن کاملPlanar Laser-Induced Fluorescence Imaging of Flame Heat Release Rat$
Local heat release rate represents one of the most interesting experimental observables in the study of unsteady reacting flows. The direct measure of burning or heat release rate as a field variable is not possible. Numerous experimental investigations have relied on inferring this type of information as well as flame front topology from indirect measures which are presumed to be correlated. A...
متن کاملHeat Recirculation Effect on the Structure of Wood Dust Flame Propagation
A model for heat-recirculating micro combustor is developed. It investigates the structure of laminar, one-dimensional and steady state flame propagation in uniformly premixed wood particles with considering the effects of heat recirculation caused by configuration of micro combustor. The flame structure is divided into three regions: a preheat-devolatilization zone where the rate of the gas-ph...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Mathematical Modelling
سال: 2009
ISSN: 0307-904X
DOI: 10.1016/j.apm.2008.07.020