Tuning the release profile of ketoprofen from poly(l-lactic acid) suture using supercritical CO2 impregnation process

Supercritical Co2 Impregnation of Polyethylene Components for Medical Purposes

Modern hip and knee endoprosthesis are produced in titanium and to reduce the friction at the contact area polymer parts, mainly ultra-high molecular weight polyethylene (UHMW-PE), are installed. The polyethylene is impregnated with αtocopherol (vitamin E) before processing for remarkable decrease of oxidative degradation. Cross linked UHMW-PE offers much higher stability, but α-tocopherol cann...

Characterization and biological evaluation of paclitaxel-loaded poly(L-lactic acid) microparticles prepared by supercritical CO2.

In this study, paclitaxel loaded poly( L-lactic acid) (PTX-PLLA) microparticles were prepared using solution enhanced dispersion by supercritical CO2(SEDS) technique. This supercritical antisolvent technique offers the advantage of negligible organic solvent residua in the drug loaded microparticles. Scanning electron microscopy (SEM) showed that microparticles exhibited rather spherical shape ...

a study on the design of bio-ethanol process from date wastes of sistan and baluchistan province

اتانول کاربردهای متنوعی در صنایع لاستیک سازی، رنگسازی، حلالها ومکمل سوخت خودرو دارد. اتانول برخلاف نفت از جمله مواد تجدیدپذیر محسوب می شود که مشکلات زیست محیطی و آلودگی نیز ایجاد نمی کند. استفاده از اتانول به عنوان مکمل سوختخودروها از جمله مهمترین مصارف صنعتی این ماده بشمار می رود. با توجه به این موضوع تحقیق و توسعه در زمینه تولید اتانول با درجه خلوص بالا در سطح جهان، و نه تنها در کشور های پیشر...

Batch Foaming of Amorphous Poly (DL-Lactic Acid) and Poly (Lactic Acid-co-Glycolic Acid) with Supercritical Carbon Dioxide: CO2 Solubility, Intermolecular Interaction, Rheology and Morphology

Separation of phenolic compounds from plant materials using supercritical CO2

In the present work supercritical fluid extraction (SFE) using CO2, was applied for the pre-treatment of mandarin peels. Two-step extraction, combining SFE and conventional extraction, was investigated. During the first extraction step supercritical CO2 at temperatures 25, 40 and 60°C and pressures from 100 to 300 bar was applied to remove the non-polar components from the extracting material. ...