Tungsten-based highly selective solar absorber using simple nanodisk array

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Selective Solar Absorber Materials: Nanostructured Surfaces

Current solar to thermal energy conversion technologies, including concentrated solar power (CSP) and solar water heaters (SWH) utilize absorber surfaces that collect incident solar radiation. However, these absorber surfaces emit thermal energy (at their temperature) in the infrared (IR) spectrum, resulting in decreased overall efficiency for solar-to-thermal conversion. Selective absorber sur...

متن کامل

Highly Efficient Selective Metamaterial Absorber for High-Temperature Solar Thermal Energy Harvesting

In this work, a selective solar absorber made of nanostructured titanium gratings deposited on an ultrathin MgF2 spacer and a tungsten ground film is proposed and experimentally demonstrated. Normal absorptance of the fabricated solar absorber is characterized to be higher than 0.9 in the UV, visible and, near infrared (IR) regime, while the mid-IR emittance is around 0.2. The high broadband ab...

متن کامل

Manganese pigmented anodized copper as solar selective absorber

The study concerns the optical and structural properties of layers obtained by a new efficient surface treatment totally free of chromium species. The process is made up of an anodic oxidation of copper in an alkaline solution followed by an alkaline potassium permanganate dipping post-treatment. Coatings, obtained at the lab and pilot scales, are stable up to 220 C in air and vacuum, present l...

متن کامل

Platinum-Based High Temperature Selective Absorber Coatings

In photothermal energy conversion the absorbed solar flux is converted to heat which is then used directly or is converted to mechanical or electrical energy. Efficient receiver design requires that thermal losses from the absorber surface, which is the hottest element of the system, be minimised. Receivers are, in fact, generally classified according to their operating temperature ( I , 2). Th...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Optics Express

سال: 2017

ISSN: 1094-4087

DOI: 10.1364/oe.25.0a1072