Tungsten Base Alloys with Low Thermal Expansion Coefficient (2nd Report)
نویسندگان
چکیده
منابع مشابه
Ultra-High Accuracy Measurement of the Coefficient of Thermal Expansion for Ultra-Low Expansion Materials
Microlithographic systems rely on precision alignment and a high-level of dimensional stability to achieve required performance. In critical applications, immunity to thermally induced dimensional changes is achieved by the use of low coefficient of thermal expansion (CTE) materials such as ULE® in components such as reflective optics and machine structures. ULE® has an expansion coefficient (α...
متن کاملThermal expansion coefficient of hydrogenated amorphous carbon
The coefficient of thermal expansion ~CTE! of hydrogenated amorphous carbon (a-C:H) was investigated as a function of the concentration of sp hybridization. The CTE, determined using the thermally induced bending technique, depends on the concentration of sp bonded carbon, increasing to the value of graphite as the sp concentration approaches 100%. By using a combination of the thermally induce...
متن کاملConventional sintering of LAS-SiC nanocomposites with very low thermal expansion coefficient
Very low thermal expansion materials have been developed in a wide temperature range from -150 oC to 450 oC. These very low expansion materials are composed of a lithium aluminosilicate matrix with dispersed silicon carbide nanoparticles. The nSiC content in the most stable composite has resulted to be 27 vol.%. Powder processing and sintering temperature control have been found to be of key im...
متن کاملOn the Determination of Thermal Expansion Coefficient of Thermal Oxide
The accurate value of thermal expansion coefficient ( ) of thin film is an important thermal property in the design of microelectronic devices and microsystem. This research presents a microbridge buckling deformation caused by the residual stresses to determine the of thermal oxide (SiO2) film. The extraction of is supported through experimental means and finite element analysis (FEM) of the b...
متن کاملA Novel Preparation of Polyimide/Clay Hybrid Films with Low Coefficient of Thermal Expansion
A novel polyimide (PI)/clay hybrid nanocomposite, designated as PI (PAAS)/CM, has been developed from the poly(amic acid) salt of triethylamine and organomontmorillonite (CM) using a mixture solution of tetrahydrofuran (THF) and methanol (MeOH). For comparison, two other PI/clay hybrids derived from poly(amic acid) and CM in THF/MeOH solution and N,N9-dimethylacetamide (DMAc) solution, denoted ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1963
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.10.189