Tritium Radioluminography in V<SUB>3.5</SUB>(Zr, Ti, Ni) Protium Absorption Alloy
نویسندگان
چکیده
منابع مشابه
Dental casting of superelastic Ni-Ti alloy.
Rods of Ni-43.5wt% Ti alloy were prepared under various casting conditions. Specimens which were melted in a cordierite crucible and cast in a phosphate-bonded investment mold had less strength and elongation than those melted in a copper crucible and cast in a phosphate-bonded investment mold. All castings exhibited superelasticity at room temperature. The upper limit of recoverable strain was...
متن کاملPhotoelectrochemical Water Splitting Properties of Ti-Ni-Si-O Nanostructures on Ti-Ni-Si Alloy
Ti-Ni-Si-O nanostructures were successfully prepared on Ti-1Ni-5Si alloy foils via electrochemical anodization in ethylene glycol/glycerol solutions containing a small amount of water. The Ti-Ni-Si-O nanostructures were characterized by field-emission scanning electron microscopy (FE-SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and diffuse reflectance absorption spectra....
متن کاملFatigue properties of Ni-43.5%Ti superelastic alloy castings.
To evaluate a Ni-43.5wt%Ti alloy as a new alloy for cast clasp, the fatigue properties of its castings were examined and compared with those of Co-Cr and Type IV Au alloys castings. The Ni-Ti alloy was cast into a phosphate-bonded investment mold using an argon-arc melting and pressure casting machine. The Ni-Ti alloy castings showed superelasticity in bending tests. Fatigue tests were carried ...
متن کامل[Fundamental studies on superelastic Ni-Ti alloy for wire clasp].
In order to apply Ni-Ti superelastic alloy to wire clasp in dentistry, the bending characteristics and the shape memory treatment of the wire were investigated. The wire cooled in iced water was more easily bent than that stored at room temperature . In both conditions, however, most of the wire specimens were broken by bending before the radius of curvature became less than three times the dia...
متن کاملStructural and Textural Evolution during Cold Work in Ti-Rich Ni-Ti Shape Memory Alloy
The properties and cost have made the Nickel-Titanium (NiTi) shape memory alloys (SMA) attractive for a variety of applications wherein shape memory effect (SME) / superelasticity (SE) and biocompatibility are important. Anisotropy of the shape recovery associated with shape memory effect strongly depends on the type of r 30 minutes in air) Ti-Rich Ni-Ti SMA (Ni51at%Ti) when subjected to cold r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1999
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.63.9_1085