Tritium absorption/desorption in ITER-like tungsten particles
نویسندگان
چکیده
منابع مشابه
Tritium Modeling for Iter Test Blanket Module
HCPB (Helium Cooled Pebbles Bed) Test Blanket Model (TBM) is based on solid breeder. Tritium has to be extracted using Helium purge gas flowing through breeder pebbles bed. He-stream must be cooled down and processed and all these steps are carried out in TES (Tritium Extraction System). A modeling work has been performed to study the behavior of the TES of the HCPB TBM and for Molecular Sieve ...
متن کاملKinetics of carbide formation in the molybdenum-tungsten coatings used in the ITER- like Wall
The kinetics of tungsten carbide formation was investigated for tungsten coatings on CFC with a molybdenum interlayer as they are used in the ITER-like Wall in JET. The coatings were produced by combined magnetron sputtering and ion implantation. The investigation was performed by preparing focused ion beam cross sections from samples after a heat treatment in argon atmosphere. Baking of the sa...
متن کاملR&D on full tungsten divertor and beryllium wall for JET ITER-like wall project
The ITER reference materials have been tested separately in tokamaks, plasma simulators, ion beams and high heat flux test beds. In order to perform a fully integrated material test JET has launched the ITER-like Wall Project with the aim of installing a full metal wall during the next major shutdown. As a result of R&D projects in 2005–2006, bulk tungsten tiles are foreseen at the outer horizo...
متن کاملTritium Retention in Tungsten Exposed to Intense Fluxes of 100 eV Tritons 5 SO 56
Tungsten is a candidate material for ITER as well as other future magnetic fusion energy devices. Tungsten is well suited for certain hsion applications in that it has a high threshold for sputtering as well as a very high melting point. As with all materials to be used on the inside of a tokamak or similar device, there is a need to know the behavior of hydrogen isotopes embedded in the materi...
متن کاملAlfvénic Instabilities Driven by Alpha Particles in ITER Scenarios
Abstract. The stability of proposed ITER scenarios with respect to Alfvénic instabilities driven by fusionproduced alpha particles is investigated by hybrid MHD-particle simulations. Three cases are considered: the monotonic safety-factor scenario (SC2), the reversed-shear one (SC4) and a flat safety-factor profile “hybrid” scenario (SCH). Though all the cases are found unstable, growth rates a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Hydrogen Energy
سال: 2014
ISSN: 0360-3199
DOI: 10.1016/j.ijhydene.2014.05.023