Triple Band Parasitic Array Antenna for C-X-Ku-Band Application Using Out-of-Phase Coupling Approach
نویسندگان
چکیده
منابع مشابه
Microstrip Antenna for X and Ku Band
A design of microstrip patch antenna gap coupled with two parasitic elements on its non-radiating edges and a single parasitic element on its radiating edge for the operation in X band and Ku band is proposed here. The parasitic elements are partially shorted. This design is giving an impedance bandwidth of 4.967GHz. This antenna is operating over a frequency range of 11.2334 to 16.0431 GHz wit...
متن کاملModified U-Slot Stacked Micro-Strip Patch Antenna for Ultra-Wideband Applications in S Band, C Band and X Band
The U-slot micro-strip patch antennas were originally developed for bandwidth broadening applications. This study presents a transmission line feed to modify the U-slot stacked rectangular micro-strip patch antenna for Ultra-Wide Band (UWB) communications. The modified antenna has a U-cut loaded with parallel slits and corner slots and is printed on a dielectric substrate of FR4 with relative p...
متن کاملCircular Patch Microstrip Array Antenna for KU-band
This paper present a circular patch microstrip array antenna operate in KU-band (10.9GHz – 17.25GHz). The proposed circular patch array antenna will be in light weight, flexible, slim and compact unit compare with current antenna used in KU-band. The paper also presents the detail steps of designing the circular patch microstrip array antenna. An Advance Design System (ADS) software is used to ...
متن کاملTriple Band Rectangular Microstrip Antenna for S & C Band Applications
In this paper, triple band rectangular microstrip antenna with two vertical rhombus shaped slot (TBRMA2VRS) is designed and developed for S and C band frequency applications. The triple bands are obtained by etching two rhombus slots on the patch surface. The impedance bandwidth of secondary band is enhanced from 2.06% to8.54% by replacing the two rhombus slots. The radiation patterns measured ...
متن کاملDesign, simulation and Fabrication of Circularly Polarized Fabry-Perot Antenna for Ku Band
This paper deals with the design and simulation of a RHCP Fabry-Perot antenna for 14.5 GHz. Based on transmission line model, partially Reflecting Surface (PRS) was designed so thatgain enhancement and circular polarization simultaneously obtained. PRS consist of a square loop and meander-line at the top and bottom respectively. In order to achieve the resonance condition in orthogonal componen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Antennas and Propagation
سال: 2014
ISSN: 1687-5869,1687-5877
DOI: 10.1155/2014/716829