Tribological properties of polyimide composites reinforced with fibers rubbing against Al2O3
نویسندگان
چکیده
منابع مشابه
Tribological performance of Graphene/Carbon nanotube hybrid reinforced Al2O3 composites
Tribological performance of the hot-pressed pure Al2O3 and its composites containing various hybrid contents of graphene nanoplatelets (GNPs) and carbon nanotubes (CNTs) were investigated under different loading conditions using the ball-on-disc method. Benchmarked against the pure Al2O3, the composite reinforced with a 0.5 wt% GNP exhibited a 23% reduction in the friction coefficient along wit...
متن کاملInvestigation of Mechanical Properties of Lithium-Based Geopolymer Composites Reinforced with Basalt Fibers
Recently, geopolymer binders have been considered because of low cost, simple processes for synthesis and many raw materials in nature. Geopolymer with brittle nature does not have high strength and cannot be used alone for structural materials. Therefore, to use in different structures, the composite which is reinforced with fibers such as carbon, glass, basalt, etchasbeen used. In this resear...
متن کاملMechanical Properties of the Palm Fibers Reinforced HDPE Composites
Natural fibers are used in polymer composites to improve mechanical properties to replace inorganic reinforcing agents produced by non-renewable resources. The present study investigates the tensile and flexural behaviors of palm fibers-high density polyethylene (HDPE) composite as a function of volume fraction. The surface of the fibers was treated by mercerization treatments to improve the we...
متن کاملFlexural strength and tribological properties of rare earth treated short carbon fiber/polyimide composites
To investigate the influence of carbon fiber (CF) surface treatment on the flexural strength and tribological properties of the short-cut CF/polyimide (PI) composites, pitch-based short-cut CF were treated by rare earth. The CF before and after treatment was examined by X-ray photoelectron spectroscopy (XPS) and by scanning electron microscopy (SEM). The flexural strength of the specimens was d...
متن کاملFsw Of Polypropylene Reinforced With Al2o3 Nano Composites, Effect On Mechanical And Microstructural Properties
Friction stir welding is a solid state joining process first used for welding of Aluminum and its alloys, is now employed for welding of polymers and composite materials. Polypropylene (pp) is one of polymer materials used in many applications due to its good performance, high strength to weight ratio and excellent processing properties, its application is limited due to its weak abrasive prope...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Friction
سال: 2020
ISSN: 2223-7690,2223-7704
DOI: 10.1007/s40544-019-0339-6