Tribological Properties of New Cu-Al/MoS2 Solid Lubricant Coatings Using Magnetron Sputter Deposition
نویسندگان
چکیده
منابع مشابه
Tribological behavior of sputter-deposited MoSX/Ni coatings
AbstractSputtered MoS2 coatings have been mostly used as a solid lubricant. In this investigation, MoSx/Ni composite coatings with Ni contents varying from 0 to 22 % were deposited onto steel substrate using a DC magnetron sputter process. The MoS2/Ni ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the...
متن کاملEffect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings
Titanium nitride thin films were grown on 304 stainless steel substrates at various nitrogen/argon flow ratios by ion beam sputtering (IBS) technique. The current research is a follow up study on the influence of gas ratio on structural and corrosion properties in the TiN coated 304 stainless steel. Film structural identification of phases was performed using X-ray diffractometry (XRD). Sca...
متن کاملA Study of the Tribological Properties of Sputter-deposited MoSX/Cr Coatings
In this investigation, MoSx/Cr coatings were deposited by direct-current magnetron sputter onto Ck45 (AISI 1045) plain carbon steel substrates. The MoSx/Cr ratio in the coatings was controlled by sputtering the composite targets. The chemical characterization was performed using EDX (energy dispersive X-ray analysis); the structural characterization was accomplished by X-ray diffraction (XRD) s...
متن کاملReactive Magnetron Sputter Deposition of Bismuth Tungstate Coatings for Water Treatment Applications under Natural Sunlight
Bismuth complex oxides, in particular, bismuth tungstate, have recently attracted attention as promising photocatalytic materials for water treatment processes. In the present work, photocatalytic bismuth tungstate films were prepared by pulsed direct current (DC) reactive magnetron sputtering of Bi and W targets in an Ar/O2 atmosphere onto spherically-shaped glass beads. The uniform coverage o...
متن کاملGrowth of epitaxial Cu on MgO(001) by magnetron sputter deposition
100-nm-thick Cu layers were grown on MgO(001) substrates by ultra-high vacuum magnetron sputter deposition at substrate temperatures Ts ranging from 40 to 300 °C. X-ray diffraction ω−2θ scans, ω-rocking curves, and pole figures show that layers grown at Ts=40 and 100 °C are complete single crystals with a cube-on-cube epitaxial relationship with the substrate: (001)Cu||(001)MgO with [100]Cu||[1...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coatings
سال: 2018
ISSN: 2079-6412
DOI: 10.3390/coatings8040134