Tribological Properties of Hybrid Friction Materials: Combining Low-steel and Non-steel Friction Materials
نویسندگان
چکیده
منابع مشابه
Experimental Investigation on Friction and Wear Properties of Different Steel Materials
Friction coefficient and wear rate of different steel materials are investigated and compared in this study. In order to do so, a pin on disc apparatus is designed and fabricated. Experiments are carried out when different types of disc materials such as stainless steel 314 (SS 314), stainless steel 202 (SS 202) and mild steel slide against stainless steel 314 (SS 314) pin. Experiments are cond...
متن کاملEffect of surface roughness on steel-steel dry friction coefficient
The influence of surface roughness magnitude and direction on dry static friction coefficient between two similar steel samples has been studied through an experiment. A testing apparatus has been designed and fabricated to measure the friction coefficient for a few forms of surface asperity. According to the results of the experiments, dry friction coefficient is affected by both magnitude and...
متن کاملTorsional Tribological Behavior and Torsional Friction Model of Polytetrafluoroethylene against 1045 Steel
In this work, the plane-on-plane torsional fretting tribological behavior of polytetrafluoroethylene (PTFE) was studied. A model of a rigid, flat-ended punch acting on an elastic half-space was built according to the experimental conditions. The results indicate that the shape of T-θ curves was influenced by both the torsional angle and the normal load. The torsion friction torque and wear rate...
متن کاملTribological Characteristics of the Surface Layer of Steel Modified with Boron under Mixed Friction Conditions
The aim of the present work is to determine the influence of technologically produced boron surface layers on the friction parameters in the sliding pairs under mixed friction conditions. The current boronizing processes allow obtaining surface layers of high hardness and high resistance to corrosion and wear, with low brittleness and no tendencies towards cracking However, the operation charac...
متن کاملFriction and wear of restorative dental materials.
Many different instruments have been developed for the measurement of friction and wear.1-5 Often the instrument was designed to accommodate some particular type of material, environment, or test condition. Studies reported in the dental literature have been limited to wear measurements with simulated toothbrushing methods,6-9 or on prosthetic teeth mounted on an articulator.10 This study will ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Society of Tribologists and Lubrication Engineers
سال: 2012
ISSN: 2287-4666
DOI: 10.9725/kstle.2012.28.3.117