Tribological properties of composite multilayer coating
نویسندگان
چکیده
منابع مشابه
The tribological properties of Cu-Ni3Al-MoS2 composite coating deposited by magnetron sputtering
In industrial applications, most materials are exposed to wear and friction because multiple conditions are used. However, the tribological properties of these materials can be improved with different techniques. One such technique that improves the frictional property of a surface is the use of self-lubricating coatings. In this study, multicomponent coatings of nominal composition Cu-Ni3Al-Mo...
متن کاملthe tribological properties of cu-ni3al-mos2 composite coating deposited by magnetron sputtering
in industrial applications, most materials are exposed to wear and friction because multiple conditions are used. however, the tribological properties of these materials can be improved with different techniques. one such technique that improves the frictional property of a surface is the use of self-lubricating coatings. in this study, multicomponent coatings of nominal composition cu-ni3al-mo...
متن کاملMicrostructure and Tribological Performance of TiB2-NiCr Composite Coating Deposited by APS
Nickel chromium (NiCr) powders with different titanium diboride (TiB2) additions (20, 40 and 60 wt %) were prepared with a mechanical alloying method and then sprayed using an air plasma spraying technology. The microstructure and phase composite of the powders and the cross-sections of deposited coatings were analyzed with a scanning electronic microscope and X-ray diffraction. The tribologica...
متن کاملEvaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite
Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...
متن کاملPhotoelectrochemical Properties of CuS-GeO2-TiO2 Composite Coating Electrode
The ITO (indium tin oxide) conductive glass-matrix CuS-GeO2-TiO2 composite coating was generated via EPD (electrophoretic deposition) and followed by a sintering treatment at 450°C for 40 minutes. Characterizations of the CuS-GeO2-TiO2 composite coating were taken by SEM (scanning electron microscope), XRD (X-ray diffraction), EDX (energy dispersive X-ray), UV-Vis DRS (ultraviolet-visible diffu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tribology - Materials, Surfaces & Interfaces
سال: 2011
ISSN: 1751-5831,1751-584X
DOI: 10.1179/1751584x11y.0000000015