Tribological Behavior of Hydraulic Oils Under Different Motion Modes
نویسندگان
چکیده
In order to study the tribological properties of different hydraulic oils under motion modes, four-ball tester and block-on-ring were used optimize test parameters evaluate performance commercial oils. The results showed that optimized methods form point line modes can better extreme pressure anti-wear oi. There was a negatively correlation between performance; this method provide basis for reasonable selection lubricating oil in system.
منابع مشابه
investigation of gassing behavior, electric and dielectric properties of different insulating fluids.
ترانسفورماتورهای قدرت از اجزای اصلی شبکه تامین انرژی الکتریکی می باشند که عملکرد قابل اطمینان ترانسفورماتورها یکی از فاکتورهای مهم و تعیین کننده در تامین انرژی الکتریکی محسوب می شود. در نتیجه بررسی و مانیتور عملکرد ترانسفورماتورها در شبکه و همچنین عیب یابی این ترانسفورماتورها غیرقابل اجتناب و ضروری می باشد. به طور کلی عایق های مایع در صنعت فشار قوی کاربردهای متفاوتی دارند که مهمترین وظیفه آنها...
15 صفحه اولDistribution of lateral active earth pressure on a rigid retaining wall under various motion modes
The design of retaining walls depends on the magnitude of active pressure exerted from the backfill. Therefore, estimating the scale of this pressure is a fundamental factor in the design. In this study, to assess the active earth pressure, a rigid retaining wall was built capable of translating and/or rotating with adjustable speed. Further, several physical tests were conducte...
متن کاملTribological Behavior of Very Thin Confined Films
The tribological properties of two smooth surfaces in the presence of a thin confined film are investigated with a generic model for the interaction between two surfaces and with computer simulations. It is shown that at large normal contact pressures, an ultra thin film automatically leads to static friction between two flat surfaces-even if the surfaces are incommensurate. Commen-surability i...
متن کاملPredicting Motion Behavior Under Contact Uncertainty
Performing complex assembly tasks with robots requires fine-motion planners able to cope with uncertainty and contact motions, which is a difficult issue. This report proposes a method to predict the behavior of motions under contact uncertainty in order to check the feasibility of paths generated by gross-motion planning algorithms from a nominal model of the environment. This pragmatical appr...
متن کاملTribological behavior of sputter-deposited MoSX/Ni coatings
AbstractSputtered MoS2 coatings have been mostly used as a solid lubricant. In this investigation, MoSx/Ni composite coatings with Ni contents varying from 0 to 22 % were deposited onto steel substrate using a DC magnetron sputter process. The MoS2/Ni ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2021
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202123304021