Tribological Behavior of A-356/SIC/B4C Nanoparticles
نویسندگان
چکیده
منابع مشابه
Tribological behavior of vegetable oil-based lubricants with nanoparticles of oxides in boundary lubrication conditions
This work studied the development of vegetable based lubricants and the addition of oxides nanoparticles (ZnO and CuO) as additive for extreme pressure (EP), exploring the EP and oil base influence in tribological behavior. The results showed that with the addition of nanoparticles to conventional lubricant, the tribological properties can be significantly improved. A smoother and more compact ...
متن کاملThe Effect of Simultaneous Incorporation of PTFE Nanoparticles and Carbon Nanotubes on the Tribological Behavior of Ni-P Coating
In some engineering fields, wear resistance and a low friction coefficient are required at the sametime. In this research, PTFE nanoparticles and carbon nanotubes were co-deposited within Ni-Pmatrix to obtain an Ni-P-PTFE-CNT hybrid coating for wear resistance and a low friction coefficient.The tribological properties of the deposits were evaluated by pin on disc tribometer. T...
متن کاملTribological Behavior of Very Thin Confined Films
The tribological properties of two smooth surfaces in the presence of a thin confined film are investigated with a generic model for the interaction between two surfaces and with computer simulations. It is shown that at large normal contact pressures, an ultra thin film automatically leads to static friction between two flat surfaces-even if the surfaces are incommensurate. Commen-surability i...
متن کاملTribological behavior of sputter-deposited MoSX/Ni coatings
AbstractSputtered MoS2 coatings have been mostly used as a solid lubricant. In this investigation, MoSx/Ni composite coatings with Ni contents varying from 0 to 22 % were deposited onto steel substrate using a DC magnetron sputter process. The MoS2/Ni ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the...
متن کاملTribological Behavior of Reinforced and Unreinforced High Chromium Cast Iron
In this paper, the metal matrix composites containing 22 wt % Cr, 2.5 wt % C and 2 to 16 volume percent TiC were processed by solidifying Fe-Cr-Ti-C in which precipitation of titaniumcarbide and chromium carbide occurred. The microstructure and abrasion resistance of in-situ synthesized composites were compared with the unreinforced high chromium white cast iron (HCWCI) containing 22 w. t. % C...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Indian Journal of Science and Technology
سال: 2016
ISSN: 0974-5645,0974-6846
DOI: 10.17485/ijst/2016/v9i48/108445