Tribological Analysis of Oxide Scales during Cooling Process of Rolled Microalloyed Steel
نویسندگان
چکیده
منابع مشابه
consequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
Process modeling of microalloyed steel for near net shape casting
Strip casting is an emerging technology for flat products; it is based on the concept of near-net shape casting; it holds potential for substantial energy saving and reduction in environmentally undesirable emission. In conventional thermo-mechanical processing, the pinning pressure due to the effects of Nb and NbC on boundary mobility is used to advantage to retard static recrystallisation and...
متن کاملKinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel
In the current study, the recrystallization behavior of 75% cold-rolled Fe-22Mn-10Al-1.4C steel during annealing at 750, 770, 790, 810, and 830°C was studied. X-ray diffraction patterns and optical microscopy were used to characterize microstructures. The Vickers Micro-hardness test was used to characterize recrystallization kinetics during annealing. Johnson-Mehl-Avrami-Kolmogorov (JMAK) model...
متن کاملEffect of NbMo Addition on the Precipitation Behaviour of V Microalloyed Steel during Intercritical Annealing
This paper reports on the precipitation behaviour and microstructural evolution in ~20% cold rolled NbMoV and V single microalloyed low carbon steels during intercritical annealing. The microstructure and precipitation behaviour were studied by optical and scanning/transmission electron microscopy and microanalysis, X-ray diffraction technique and Vickers hardness testing. After intercritical a...
متن کاملEvaluating Oxide Shell Performance of Hot-Rolled Steel as an Additive in Bitumen
Nowadays, in addition to materials and components of asphalt mixtures that are bitumen, aggregates and mineral fillers, other materials known as additives or modifiers are also used. These compounds include wide range of organic, inorganic, industrial, and natural materials used in order to reduce deficiencies, to improve the physical properties and to modify some mechanical properties o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Materials Research
سال: 2014
ISSN: 1662-8985
DOI: 10.4028/www.scientific.net/amr.1017.435