Tribocorrosion Response of Surface-Modified Ti in a 0.9% NaCl Solution
نویسندگان
چکیده
منابع مشابه
Optimization of Copper and Zinc ions removal from aqueous solution by modified Nano-bentonite using Response surface methodology
Presence of heavy metal ions in wastewater is an important public concern. Adsorption are commonly used technique to remove various pollutants, including the ions, from contaminated water sources. However, common methods for adsorption are not completely efficient at low ion concentrations and the adsorbent should be improved in order to reaching the acceptable levels of adsorption efficiency. ...
متن کاملThe efficiency of modified powdered activated carbon for removal of ammonia nitrogen from aqueous solution: a process optimization using RSM (Response Surface Methodology), adsorption isotherm and kinetic study
The objective of this study was to determine the performance of modified commercial powdered activated carbon (MCPAC) in removal of ammonia from aqueous solution. The effects of adsorbent dosage (0.5–1.5 g/L), ammonia concentration (100–200 mg/L), pH (3 to 9) and contact time (2 to 120 min) were examined. In this study, experiments were performed based on Response Surface Methodology (RSM). The...
متن کاملa study on construction of iranian life tables: the case study of modified brass logit system
چکیده ندارد.
15 صفحه اولIn vitro Response of Asparagus breslerianus to NaCl
Asparagus breslerianus a wild species in Iran, exhibited tolerance to salt in dry gypsum hills and dry lands. In order to check for salt tolerance thresholdvia in vitro conditions, the A. breslerianus callus was subjected to NaCl (sodium chloride) treatments. Six weeks old calli derived from male spear bud, were exposed to 0, 21.88, 43.76, 65.64, 76.58, 87.52, 109.40, 131.28, 153.16 and 175.04 ...
متن کاملTurmeric extract as a biocompatible inhibitor of mild steel corrosion in 3.5% NaCl solution
Corrosion inhibitory impacts of turmeric with concentrations of 200-800 ppm on the electrochemical behavior of mild steel were studied in the medium of NaCl 3.5% using several techniques such as electrochemical impedance spectroscopy (EIS) and polarization. Scanning electron microscopy (SEM) was used for analyzing the surface of mild steel after 24 hours of immersion in the electrolyte solution...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Lubricants
سال: 2018
ISSN: 2075-4442
DOI: 10.3390/lubricants6040086