Triangular Director Dipole Antenna with Rectangular Impedance Balun
نویسندگان
چکیده
This study presents a triangle director dipole antenna with rectangular impedance balun (RIB). The proposed consists of triangular director, coplanar waveguide (CPW) to stripline (CPS) transition line, and the RIB. substitutes typical planar quasi-Yagi antenna. has modified generates circular polarization. Also, RIB match an between CPW-fed CPS line. It obtains ultra-wide frequency band 4020 MHz (2160 - 6180 MHz), peak realized gain 12.5 – 6.2 dBi in operating band. shifts resonant lower 75% than antennas. uses widely for wireless medical communication, both ISM bands C-V2X applications.
منابع مشابه
Dual wideband printed dipole antenna with integrated balun
A printed dipole antenna with integrated balun is presented. The radiating structure is a two-element dipole with resonances at 900 and 1700 MHz, with the balun providing one extra resonance at each band. By co-designing the radiating element with a Marchand balun modified for dual-band operation, an antenna covering the cellular bands 824–960 and 1710–2170 MHz has been achieved. Measurements o...
متن کاملRectangular Microstrip Patch Antenna with Triangular Slot
This paper describes the design of Rectangular Microstrip Patch Antenna with Triangular Slot (RMPATS) at a frequency of f = 2. 4 GHz. The proposed antenna has been designed by introducing a triangular slot in the rectangular patch. The FR4-Epoxy with relative permittivity 4. 4 and height 1. 6 mm is used as substrate material. Antenna is fed by coaxial probe feed. The proposed antenna have accep...
متن کاملMeasurements of Balun and Gap Effects in a Dipole Antenna
In the present paper, design and analysis of a 2.4 GHz printed dipole antenna for wireless communication applications are presented. Measurements on return loss and radiation pattern of this antenna configuration are included in this investigation. The printed dipole is combined with the feeding structure of a microstrip via-hole balun and is fabricated on an FR-4 printed-circuit-board substrat...
متن کاملDual-Band Loop-Loaded Printed Dipole Antenna with a Wideband Microstrip Balun Structure
─ A novel loop-loaded printed dipole (LLPD) with a wideband balun structure is presented for aiming a dual-band antenna operation at 3.0/5.5 GHz bands. The proposed balun structure alone demonstrates VSWR<1.5 performance over a 3:1 bandwidth. As the loop elements placed on the antenna aperture provides dual-band operation with at least 15% impedance bandwidths, the wideband balun/feed allows fo...
متن کاملDual-band and Wideband Design of a Printed Dipole Antenna Integrated with Dual-band Balun
A dual-band printed dipole antenna with integrated balun feed is given in this paper. First, the fork-shaped slot is etched on the arms of the printed dipole antenna to achieve the dual-band operation with resonances at WLAN bands. The radiating element without balun is optimized and operates at 2.4 GHz (2180–2750MHz) and 5.2GHz (5040 MHz–5480MHz) where return loss is less than −10 dB. In order...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Current Engineering and Technology
سال: 2022
ISSN: ['2277-4106', '2347-5161']
DOI: https://doi.org/10.14741/ijcet/v.12.3.2