Traversing Hot-Jet Ignition in a Constant-Volume Combustor
نویسندگان
چکیده
منابع مشابه
Ignition of a Large Volume Plasma with a Plasma Jet
This Article is brought to you for free and open access by the Electrical & Computer Engineering at ODU Digital Commons. It has been accepted for inclusion in Electrical & Computer Engineering Faculty Publications by an authorized administrator of ODU Digital Commons. For more information, please contact [email protected]. Repository Citation Laroussi, M. and Akman, M. A., "Ignition of a L...
متن کاملIgnition and Flame Stabilization of a Strut-Jet RBCC Combustor with Small Rocket Exhaust
A Rocket Based Combined Cycle combustor model is tested at a ground direct connected rig to investigate the flame holding characteristics with a small rocket exhaust using liquid kerosene. The total temperature and the Mach number of the vitiated air flow, at exit of the nozzle are 1505 K and 2.6, respectively. The rocket base is embedded in a fuel injecting strut and mounted in the center of t...
متن کاملSpark Ignition Energy Measurements in Jet A
Experiments have been carried out to measure the spark ignition energy of Jet A vapor in air. A range of ignition energies from 1 mJ to 100 J was examined in these tests. The test method was validated by first measuring ignition energies for lean mixtures of the fuels hexane (C6H6) and propane (C3H8) in air at normal temperature (295 K) and pressure (1 atm). These results agree with existing da...
متن کاملIgnition and flameholding in a supersonic combustor by an electrical discharge combined with a fuel injector
The paper presents the results of an experimental study of supersonic combustor operation enhanced by an electrical discharge. A novel scheme of plasma assisted ignition and flameholding is demonstrated, which combines a wall fuel injector and a high-voltage electric discharge into a single module. The experimental combustor with the cross section of 72 mm (width) 60 mm (height) and length of...
متن کاملIgnition Characteristics of Turbulent Jet Flows
Releases of flammable materials from chemical plant are a hazard since their dispersion down to safe levels only occurs at some distance from their source. Within this distance, accidental ignition can give rise to fires or explosions. This paper describes the development of computational fluid dynamic models capable of predicting the ignition hazards presented by turbulent releases of flammabl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Engineering for Gas Turbines and Power
سال: 2013
ISSN: 0742-4795,1528-8919
DOI: 10.1115/1.4025659