Transverse Shear Properties of CFRP Laminates under Static Loading.
نویسندگان
چکیده
منابع مشابه
Scaling Effects in Carbon/Epoxy Laminates Under Transverse Quasi-Static Loading
Since its founding, NASA has been dedicated to the advancement of aeronautics and space science. The NASA Scientific and Technical Information (STI) Program Office plays a key part in helping NASA maintain this important role. The NASA STI Program Office is operated by Langley Research Center, the lead center for NASAÕs scientific and technical information. The NASA STI Program Office provides ...
متن کاملAnalysis of Concrete Bridge Girders Strengthened with Cfrp Laminates under Service and Extreme Loading Conditions
Externally bonded carbon fiber reinforced polymer (CFRP) laminates are a feasible and economical alternative to traditional methods for strengthening and stiffening deficient reinforced concrete and prestressed concrete girders as shown in Fig. (1). Although extensive research has already been undertaken to investigate the behavior of CFRP strengthened bridge girders, the majority of work condu...
متن کاملViscoelastic properties of the human medial collateral ligament under longitudinal, transverse and shear loading.
Ligament viscoelasticity controls viscous dissipation of energy and thus the potential for injury or catastrophic failure. Viscoelasticity under different loading conditions is likely related to the organization and anisotropy of the tissue. The objective of this study was to quantify the strain- and frequency-dependent viscoelastic behavior of the human medial collateral ligament (MCL) in tens...
متن کاملStrength Prediction in CFRP Woven Laminate Bolted Double-Lap Joints under Quasi-static Loading using XFEM
The current paper is concerned with modelling damage and fracture in woven fabric composite double-lap bolted joints that fail by net-tension. A 3-D finite element model is used, which incorporates bolt clamp-up, to model a range of CFRP bolted joints, which were also tested experimentally. The effects of laminate lay-up, joint geometry, hole size and bolt clamp-up torque were considered. An Ex...
متن کاملStrength Prediction in CFRP Woven Laminate Bolted Single-Lap Joints under Quasi-static Loading using XFEM
This paper is concerned with modelling damage and fracture in woven fabric CFRP single-lap bolted joints that fail by net-tension. The approach is based on the assumption that damage (matrix cracking, delamination and fibre tow fracture) initiates and propagates from the hole in a self-similar fashion. A traction-separation law (based on physically meaningful material parameters) is implemented...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1998
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.47.287