Transition of failure mode in hot stamping of AA6082 tailor welded blanks
نویسندگان
چکیده
منابع مشابه
Finite element analysis of tailor-welded blanks
A typical tailor-welded blank (TWB) is composed of several base metals, which might have di!erent mechanical properties as well as thickness. Moreover, a TWB contains a heat-a!ected zone (HAZ) which has quite di!erent mechanical properties from base materials. The forming behaviors of TWBs have been widely studied since they were "rst developed as a way of using collectible o!al. They are often...
متن کاملInvestigation on Formability of Tailor-Welded Blanks in Incremental Forming
Steel laser tailor-welded blanks (TWBs) are produced by end-to-end joining of base sheets using different welding methods. In this article, the formability of laser TWBs of St12 and St14 with thicknesses of 1 mm and 1.5 in single point incremental forming process were experimentally and numerically investigated. First, the forming limit wall angle was experimentally determined for each of the b...
متن کاملFormability Study of Steel Tailor laser Welded Blanks (TWB) in Stretch Forming
The use of TWB has been developed in automotive industries because of it’s advantages such as reduction in weight, cost and fuel economy of vehicles. The main objective of the peresent work is to study the effects of weld zone, diffrence in surface coating and thickness ratio on the formability of TWB composed of AISI 304, SPCC and IF steel sheets. It was found that the narrow weld zone has lit...
متن کاملFormability Study of Steel Tailor laser Welded Blanks (TWB) in Stretch Forming
The use of TWB has been developed in automotive industries because of it’s advantages such as reduction in weight, cost and fuel economy of vehicles. The main objective of the peresent work is to study the effects of weld zone, diffrence in surface coating and thickness ratio on the formability of TWB composed of AISI 304, SPCC and IF steel sheets. It was found that the narrow weld zone has lit...
متن کاملInfluence of gas tungsten arc welding parameters on the formability of aluminum tailor welded blanks
Welding method and its parameters has an important effect on the formability and mechanical properties of tailor welded blanks(TWBs). In this study gas tungsten arc welding(GTAW) is used to joint aluminum TWBs. Aluminum TWBs consist of 6061 aluminum sheets with different thickness of 1mm and 2mm. Main parameters of GTAW consist of welding current, pressure of shielding gas, welding speed and di...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Processing Technology
سال: 2018
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2018.02.028