Transient Plastic Flow and Phase Dissolution During Hot Compression of α/β Titanium Alloys
نویسندگان
چکیده
منابع مشابه
Flow Behavior of SP-700 Titanium Alloy During Hot Tensile Deformation in α+β and β Phase Regions
In this paper, in order to study the flow behavior and elongation of as-cast ingots of SP-700 titanium alloy, hot tensile test was done in α/β dual phase and β single phase regions using strain rate of 0.1 s-1. Results showed that the hot tensile behavior of SP-700 in the α/β dual phase region (700-900 ºC) was different from the β single phase one (950-1100 ºC) due to the nature of alpha and be...
متن کاملDiscoloration and Dissolution of Titanium Peroxide - or Fluoride - containing Solutionsand Titanium Alloys withImmersion in
fluoride-containing solutien. Commercially pure titanium (CP-Ti) and six titanium-based alloys were used: Ti-O.15Pd, Ti6Al-4V, Ti-7Nb-6Al, Ti-55Ni, Ti-10Cu, and Ti-20Cr. Two test solutions were prepared fbr immersion of polished titanium and titanium alloys: one consisting of O,2% NaF + O,9% NaCl (pH 3.8 with lactic acid) and the other of O.1 mol/1 H202 + O.9% NaCl (pH 5.5). Following immersion...
متن کاملThe Ultrafine-Grained Titanium and Biomedical Titanium Alloys Processed by Severe Plastic Deformation (SPD)
the function of our tissues and organs. Among the biomedical materials, titanium alloys have received attractions for dental and orthopedic implants due to their high strength, great corrosion resistance and biocompatibility, and low density [1,2]. Recently, a series of new β titanium alloys have been developed with low elastic modulus, containing non-toxic alloying elements such as Nb, Ta, Zr ...
متن کاملModeling of Transient Flow in Plastic Pipes
We present a numerical code for calculating transient flow in plastic pipes, especially in the polyethylene pipe, to analysis water hammer phenomena. The set partial differential equations to be solved is obtained using conservation laws and behavior for the fluid and the pipe wall, associated with constitutive equations of the two media, and relationships compatibility of interfaces on velocit...
متن کاملPhase transformation kinetics during continuous heating of and metastable titanium alloys
The effect of heating rate on the phase trans-formation kinetics of a Ti–10V–2Fe–3Al metastable btitanium alloy quenched from the b field is investigated byfast in situ high energy synchrotron X-ray diffraction anddifferential scanning calorimetry. The initial microstructureis formed by a00 martensite and finexath particles distrib-uted in the retained b-phase matrix...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions A
سال: 2020
ISSN: 1073-5623,1543-1940
DOI: 10.1007/s11661-020-05673-9