Transient Calculation Studies of Liquid–Solid Collision in Jet Descaling

Mutual Collision of Water Jets from Adjacent High Pressure Flat Jet Nozzles on Flat Surfaces during Hydraulic Descaling

Original scientific paper High energetic water jets sprayed from nozzles are used for scale removal. Special nozzles with flat and very narrow jets for high feed pressure are used. This process, called descaling, is used in hot rolling, for example. A number of jets must be used to cover the total width of a rolled strip. High quality and homogeneity of the descaling process is required. A row ...

Experimental Studies of Inverted - Profile Coaxial Jet Flows

data mining rules and classification methods in insurance: the case of collision insurance

assigning premium to the insurance contract in iran mostly has based on some old rules have been authorized by government, in such a situation predicting premium by analyzing database and it’s characteristics will be definitely such a big mistake. therefore the most beneficial information one can gathered from these data is the amount of loss happens during one contract to predicting insurance ...

High performance collision cross section calculation-HPCCS.

Since the commercial introduction of Ion Mobility coupled with Mass Spectrometry (IM-MS) devices in 2003, a large number of research laboratories have embraced the technique. IM-MS is a fairly rapid experiment used as a molecular separation tool and to obtain structural information. The interpretation of IM-MS data is still challenging and relies heavily on theoretical calculations of the molec...

Calculation of Collision Speed Corresponded to Maximum Penetration Using Hydrodynamic Theory

One of the most valid and efficient models of long rod projectile penetration in homogeneous targets is Tate and Alekseevskii’s (A&t) model. Based on Tate’s model, the present research tries to calculate the optimum speeds to achieve the maximum penetration depth in the homogeneous targets. The proposed collision speed-penetration depth diagrams are developed using Tate’s model. In this way, va...