Transformation method of exterior orientation angular elements obtained via position and orientation system under Gauss-Kruger projection coordinate system

Position and Orientation Tracking System (POTS)

new approach to determine 6dof position and orientation of a non-orthogonal coordinate system on the object using its image

in this paper, a new method for determining position and orientation of a coordinate system using its image is presented. this coordinate system is a three dimensional non-orthogonal system in respect to the two dimensional and orthogonal camera coordinate system.  in real world, it’s exactly easy to select three directions on an object so that they don’t be orthogonal and on a plane. the image...

Exterior Orientation Parameters

The georeference of any photogrammetric product is based on the reconstruction of the geometric relations of imaging in a chosen object coordinate system. For the handling of aerial photos traditionally the bundle of rays from the image points over the projection center to the ground points is modelled by means of the camera calibration information and the exterior orientation determined by mea...

Absolute and Exterior Orientation Using Linear Features

For many years we have had digital photogrammetric systems available that can perform automatic interior and relative orientation of aerial photographs. Developments in absolute and exterior orientation are not so robust because the problem is significantly more difficult. The reason for the increase in difficulty is that there is no easy way to create the master image or target patch which rep...

Finding Position of FACTS Elements in Power System Containing the Wind Farm to Improve System Parameters

The main concerns of network operators is the improvement of system parameters, and various ways have been developed to achieve this goal. If the use of renewable energy including wind in the grid is used, the sustainability debate and the status of the power system parameters will be twofold. In the upcoming research, we will examine the status of the parameters by placing the Facts on the 24-...