Transfer Matrix Modeling of Synthetic-Jet Actuators

Optimization of Synthetic Jet Actuators

This paper describes the optimization of a piezoelectric-driven synthetic jet actuator based on a Lumped Element Modeling (LEM). To simplify the problem, this papers splits the optimization problem into two parts. First, a constrained optimization of the cavity volume and orifice dimensions of two baseline synthetic jets, each with a given piezoelectric diaphragm, is conducted using two differe...

On Plasma Synthetic Jet Actuators

The term plasma actuator refers to an asymmetric arrangement of two electrodes (typically rectangular strips) separated by dielectric material that can be used as active flow control devices. A plasma actuator design consisting of an annular electrode array, the plasma synthetic jet actuator (PSJA), is experimentally investigated in this paper. This particular geometry creates a zero-net mass f...

Piezoelectric Actuators for Synthetic Jet Applications

Synthetic jets have been identified and utilized widely in airflow control applications. These jets of air are usually created by the use of compressed air, or an electromechanically driven vibrating platform. All of these approaches produce desired results in airflow-control such as enhanced lift and increased maneuverability. Despite the results however, system weight, size, response time and...

A Jet Formation Criterion for Synthetic Jet Actuators

This paper proposes and validates a jet formation criterion for synthetic jet actuators. The synthetic jet is a zero net mass flux device, adding additional momentum but no mass to its surroundings. Jet formation is defined as a mean outward velocity along the jet axis and corresponds to the clear formation of shed vortices. It is shown that the synthetic jet formation is governed by the Strouh...

Quantitative modeling of synthetic gene transfer