Tracing Microalloy Precipitation in Nb-Ti HSLA Steel during Austenite Conditioning
نویسندگان
چکیده
منابع مشابه
Effect of Controlled Cooling on Microstructure and Tensile Properties of Low C Nb-Ti-Containing HSLA Steel for Construction
The thermo-mechanical control processing (TMCP) of low carbon (C) Nb-Ti-containing HSLA steel with different cooling rates from 5 to 20 ◦C/s was simulated using a Gleeble 3500 system. The samples’ microstructure was characterized and the tensile properties measured. The results show that a microstructure mainly consisting of quasi-polygonal ferrite (QPF), granular bainitic ferrite (GBF), and ma...
متن کاملStructure and properties of TM processed HSLA steels
This paper deals with the influence of steel composition (with respect to the microalloying elements) and therrnomechanical treatment on structure and mechanical behaviour of HSLA (High Strength Low Alloy) steels. Four different microalloyed steels have been TM rolled under variing conditions. The austenite structure prior to transformation could be revealed by means of a special etching techni...
متن کاملModel of Microalloy Precipitation during Continuous Casting and Reheating
A comprehensive set of models of precipitate formation during steel processing has been developed. In this work, it is applied to investigate Nb(C,N) precipitation in thin microalloyed steel slabs during continuous casting, reheating in a tunnel furnace and water quenching relative to the position with the slab and alloy content. The models include a transient heat-conduction and solidification...
متن کاملMonitoring of Precipitation Hardening in an Hsla Steel through Emat Measurements of Magnetostriction*
This work demonstrates a novel application of ultrasound: measurement of magnetostriction, the change of length of a ferromagnetic material that accompanies a change in magnetization. The technique involves measuring ultrasonic waves generated by an electromagnetic acoustic transducer (EMAT), and it offers an alternative method of measuring magnetostriction in cases where it would not be feasib...
متن کاملInteraction Between Precipitation and Dynamic Recrystallization in HSLA-100 Microalloyed Steel
Strain induced precipitation in HSLA-100 steel was investigated by conducting hotcompression and relaxation tests at temperature range of 850°C to 1100°C and strain rate of 0.001s-1 to 1s-1. The absence of dynamic recrystallization at temperatures below 1000°C was attributedto the influence of dynamic precipitation. The stress relaxation tests showed that strain inducedprecipitation is possible...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2020
ISSN: 2075-4701
DOI: 10.3390/met10020243