Towards practical sulfolane based electrolytes: Choice of Li salt for graphite electrode operation

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Evaluation of Carbon-Coated Graphite as a Negative Electrode Material for Li-Ion Batteries

Low-cost and environmentally-friendly materials are investigated as carbon-coating precursors to modify the surface of commercial graphite for Li-ion battery anodes. The coating procedure and final carbon content are tuned to study the influence of the precursors on the electrochemical performance of graphite. Thermogravimetric analysis (TGA) and Brunauer– Emmett–Teller (BET) surface area analy...

متن کامل

Novel semi-solid electrolytes for Li-based batteries

Electrolytes of relevance for high performance batteries have to fulfill a variety of restrictive criteria: Not only is high Li conductivity a necessary condition to avoid too high losses, also an anion contribution as low as possible is desired as otherwise concentration polarization occurs [1]. Furthermore, the electrolyte should be mechanically stable. Beyond that, it should wet the electrod...

متن کامل

Titania and Cu-Titania Composite Layer on Graphite Substrate as Negative Electrode for Li-Ion Battery

This research study the application of the immobilized TiO2 layer and Cu-TiO2 layer on graphite substrate as a negative electrode or anode for Li-ion battery. The titania layer was produced through chemical bath deposition method, meanwhile Cu particles were deposited electrochemically. A material can be used as an electrode as it has capability to intercalates Li ions into its crystal structur...

متن کامل

THERMAL STABILITY STUDIES OF LI-ION CELL NEGATIVE ELECTRODE MATERIALS: GRAPHITE, MCMB, HARD-CARBON AND InSb

A Li-ion cell typically consists of a carbon-based negative electrode (NE); a porous polymer membrane separator (polypropylene and/or polyethylene); and a lithiated transition metal oxide (LiMxOy, M=Co, Ni, and/or Mn) positive electrode (PE). Electrodes are made by casting slurries of PE or NE-materials, PVDF-binder and carbon-black onto metal current collectors. Mixtures of Li-salts and organi...

متن کامل

Robust High-performance Dye-sensitized Solar Cells Based on Ionic Liquid-sulfolane Composite Electrolytes

Novel ionic liquid-sulfolane composite electrolytes based on the 1,2,3-triazolium family of ionic liquids were developed for dye-sensitized solar cells. The best performing device exhibited a short-circuit current density of 13.4 mA cm(-2), an open-circuit voltage of 713 mV and a fill factor of 0.65, corresponding to an overall power conversion efficiency (PCE) of 6.3%. In addition, these devic...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Power Sources

سال: 2018

ISSN: 0378-7753

DOI: 10.1016/j.jpowsour.2018.05.077