Towards Micro Rapid Manufacturing (μRM) with functionalized materials: material properties and process accuracy during stereo lithography
نویسندگان
چکیده
منابع مشابه
Manufacturing Process and Material Selection during Conceptual Design
It is important to consider every possible alternative during the design process since design decisions will determine the feasible manufacturing processes and the final product costs. Determining feasible combinations of material and manufacturing processes during conceptual design is impeded since the requirements and product characteristics are only imprecisely known. It is becoming increasi...
متن کاملRapid Manufacturing of Digital Materials
The transition from analog to digital has revolutionized many fields over the past century – most notably computation and communication – and can be used to similarly revolutionize additive manufacturing technology. Digital materials are composed of many discrete, self-aligning voxels placed in a massively parallel layer deposition process, as opposed to continuous (analog) deposition technique...
متن کاملMECHANICAL PROPERTIES OF DENTAL COMPOSITE MATERIALS REINFORCED WITH MICRO AND NANO-SIZE Al2O3 FILLER PARTICLES
Abstract: Composite specimens were prepared by dispersion of various amounts of nano-sized Al2O3 fillers in a monomer system containing 60% Bis-GMA and 40% TEGDMA. For comparative purposes, composite samples containing micrometer size Al2O3 fillers were also prepared following the same procedure. The mechanical properties of the light- cured samples were assessed by three-point flexural strengt...
متن کاملLaser-Based Meso/Micro Rapid Manufacturing System
The meso/micro layered manufacturing technologies have significant implications for the design and fabrication of complex miniature structures. A laser-based additive/subtractive Rapid Manufacturing system is thus developed to build meso/micro structures. By incorporating laser microdeposition and micromachining with a pulsed Nd:YAG laser that has four harmonic wavelengths, this manufacturing s...
متن کامل3D manufacturing of micro and nano- architected materials
Reducing mass without sacrificing mechanical integrity and performance is a critical goal in a vast range of applications. Introducing a controlled amount of porosity in a strong and dense material (hence fabricating a cellular solid) is an obvious avenue to weight reduction. The mechanical effectiveness of this strategy, though, depends strongly on the architecture of the resulting cellular ma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21
سال: 2007
ISSN: 2424-3086
DOI: 10.1299/jsmelem.2007.4.9f637