Toward Oxidation-Resistant ZrB2-SiC Ultra High Temperature Ceramics
نویسندگان
چکیده
منابع مشابه
Effect of SiC Content on the Ablation and Oxidation Behavior of ZrB2-Based Ultra High Temperature Ceramic Composites
The ablation and oxidation of ZrB₂-based ultra high temperature ceramic (UHTC) composites containing 10%, 15% and 30% v/v SiC were tested under different heat fluxes in a high frequency plasma wind tunnel. Performance was significantly affected by the surface temperature, which was strongly dependent on the composition. Composites containing 10% SiC showed the highest surface temperature (>2300...
متن کاملLattice thermal conductivity of ultra high temperature ceramics ZrB2 and HfB2 from atomistic simulations
Atomistic Green-Kubo simulations are performed to evaluate the lattice thermal conductivity for single crystals of the ultra high temperature ceramics ZrB2 and HfB2 for a range of temperatures. Recently developed interatomic potentials are used for these simulations. Heat current correlation functions show rapid oscillations which can be identified with mixed metal-Boron optical phonon modes. A...
متن کاملUltra High Temperature Ceramics: Densification, Properties and Thermal Stability
Hypersonic flights, re-entry vehicles, and propulsion applications all require new materials that can perform in oxidizing or corrosive atmospheres at temperatures in excess of 2000°C and sometimes over the course of a long working life. Ultra High Temperature Ceramics (UHTCs) are good candidates to fulfill these requirements. Within this family, the ZrB2 and HfB2 based composites are the most ...
متن کاملEffect of Silicon Carbide and graphite additives on the pressureless Sintering mechanism and microstructural characteristics of Ultra-High Temperature ZrB2 Ceramics Composites
The effect of SiC content, additives, and process parameters on densification and microstructural properties of pressureless sintered ZrB2– (1–10 wt %) SiC particulate composites have been studied. The ZrB2–SiC composite powders mixed by Spex mixer with 1-2wt% C (added as graphite powder) and CMC have been cold-compacted and sintered in argon environment in the temperature range of 1800–2100ºC ...
متن کاملUltra-refractory ceramics for high-temperature solar absorbers
It is well known that the efficiency of thermodynamic solar plants increases with the working temperature. At present the main limit in temperature upscaling is the absorber capability to withstand high temperatures. The ideal solar absorber works at high temperatures, has a low thermal emissivity and a high absorptivity in the solar spectral range . The paper reports on the high temperature em...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions A
سال: 2010
ISSN: 1073-5623,1543-1940
DOI: 10.1007/s11661-010-0540-8